Files For 3D Printing

247 files

1. 

   Free

   3d Printed Plunger

   By Jack Grace

   A 3d Print file for a Plunger, may be a little angular but nothing an upscale and some sandpaper can't fix. Already has a hole in the bottom for any screws or axles or whatever your classic dalek has planned. The lip was crafted by yours truly to match the standard movie dalek, but can be used on any classic dalek.
   
   I'm super excited because it is one of the first 3d design files I created on my own, but feel free to modify it however you want.
   

   8 downloads

      (0 reviews)

   0 comments

   Submitted March 17, 2023

2. 

   Free

   Mark 3 Dome stl files for lazy susan bearing ring

   By Adam Gready

   This is my attempt at a Mark 3 dome with a shelf designed in for a lazy susan bearing ring. I have 3d printed and assembled this but i haven't actually assembled the dome using the bearing ring so I can't guarantee it is exactly what you are looking for. The files include the complete dome, the dome cut into quarters with the lower brim separated into 1/8ths. Also included is a gluing jig for aligning the brim pieces which seemed to work quite well. The dome quarters wont fit on a 200x200 bed sorry. I have struggled to slice it up finer as Tinkercad was struggling with my request. It can be cut easily enough using meshmixer and if you slice the top of the dome off you can get 1/8th size pieces smaller enough to fit on a smaller bed. Please note all files are at 1/10th scale so make sure you increase by 1000% in your slicer!
    
   

   96 downloads

      (1 review)

   0 comments

   Submitted March 16, 2023

3. 

   Free

   Classic Dalek Gun Collar

   By Aaron J Climas

   I've made so many of these little things over the years, lining up the holes, drilling them straight. Cutting the pipe into thin slices. 
   
   Hopefully this saves other people fluffing around with drills and pipe cutters.
    
   Edit- I've printed this and it fits *perfectly* on 1" tube. It could possibly be 0.5mm smaller all around, but that will vary on a print by print basis, I guess. 
   

   23 downloads

      (0 reviews)

   0 comments

   Updated March 13, 2023

4. 

   Free

   Custom Emperor Design Figure

   By Jack Grace

   Hi folks!
   My pal taught me how to use 3d print software and I basically went into a fugue state and made this in a couple of hours.  
   I quite like his look of him, but it's obvious I'm a beginner by how I used repeated basic functions to create complex shapes somewhat inefficiently.
   My pal is gonna let me upload her files on here too, and I'll clearly label them as such, but you can probably tell ours apart because my code is always about twice as long as it could be.
   My emperor is designed to scale with 5" figures and combines the general shape of a TV21/comic emperor with the looming size of an Evil Emperor.
   

   11 downloads

      (0 reviews)

   2 comments

   Submitted March 12, 2023

5. 

   Free

   Gun Front For New Series Dalek

   By Sedrickk12

   NSD Gun Front
   

   45 downloads

      (0 reviews)

   0 comments

   Updated February 7, 2023

6. 

   Free

   Gun Back For New Series Dalek

   By Sedrickk12

   NSD Gun Back
   

   49 downloads

      (0 reviews)

   0 comments

   Updated February 7, 2023

7. 

   Free

   New Series Dalek Dome Detail

   By Sedrickk12

   Dome Detail For NSD
   

   26 downloads

      (0 reviews)

   0 comments

   Updated February 7, 2023

8. 

   Free

   NSD Dalek Eye Pivot

   By Sedrickk12

   Eye Pivot STL File for NSD
   

   19 downloads

      (0 reviews)

   0 comments

   Updated February 7, 2023

9. 

   Free

   Marx_BumpNGo_parts

   By LabRat

   STL for replacement plunger, gun, and eye-stalk, for the 6.5" (1974) Bump and Go toy. Used online images for reference and scale, as I had no access to originals to measure. Photo shows first print attempt (with some sagging, as I didn't have enough supports in place).  Also included are versions of the laser and eye-stalk with a hole ready to accept 3mm acrylic rod (in case you want to add additional "blinky/flashy" effects.  
   
   Post pics if you print these for you Dalek.
   

   17 downloads

      (0 reviews)

   0 comments

   Submitted October 11, 2022

10. 

    Free

    NSD Supreme Screw on Light cage w base

    By DalekDucky

    This is the screw-on light cage with base for the NSD Supreme Dalek complete with the dome base.
    
     
    Printing
    The inner base prints hallow, I recommend you print it on one of its side with support on the baseplate only. If your bridges are well calibrated it prints no problem for the top of the print (opposite side)
    The base follows the contour of the NSD dome perfectly.
     
    There are four holes in the base to screw onto to the dome. Two screws is likely all you need (Top and bottom) but why take a chance   
    I included a guide to help you properly place the pilot holes on your dome for the base, c/w a little arrow on the template as well as inside the base piece for correct orientation.
    
    The light cage just screws on top of the base. Making both painting and changing bulbs easy.
     
    

    35 downloads

       (0 reviews)

    2 comments

    Submitted October 10, 2022

11. 

    Free

    Renegade Dalek Styled 3D Print

    By Zach

    The body of a dalek loosely based on the Renegade dalek. The whole thing can be printed in one go. I printed it at 50% scale with 20% infill and it came out great. The three holes are for the eye and turrets; I haven't yet finished modeling them, but when I do I will add the files here.
    

    6 downloads

       (0 reviews)

    0 comments

    Submitted October 6, 2022

12. 

    Free

    NSD 'Death-Squad' Dalek claw - "Revolution of the Daleks". Fully operational

    By threegringos

    This is my NSD 'Death Squad' claw as seen on the Daleks in the 2021 New Year's special "Revolution of the Daleks".
    
    I made this originally for my own Dalek, (Dalek Axel).  I've been constantly getting messages through my Instagram from people who want a claw, so I thought I'd release it here on Project Dalek for the community to use.
    This 3D model was developed solely from screenshots and promotional images.  It looks accurate to my eye, and some deliberate (but small) compromises were made to simplify the 3D printing process.
     
    I used Fusion360 to create this model.  The claw is split into multiple parts for ease of printing.
    The ZIP file contains photos and instructions.
     
    NOTE:
    For assembly, you will need some 3mm diameter stainless steel rods or dowels for pivots.  I bought a pack from Amazon, and cut them down to size.
    You will need to provide your own arm (and Dalek) to mount the claw onto.  The claw will fit a 25.4mm (1 inch) diameter pipe.
     
    Enjoy!
     
    

    77 downloads

       (1 review)

    0 comments

    Submitted October 2, 2022

13. 

    Free

    Reworked NSD moflash cage.

    By bappi

    I downloaded the zip file from  Ultrastar's downloads and noticed that 2 of the files were labelled wrong so corrected that with these files here, I also noticed when i had printed the base that when screwed on tight there was at least 5 mm gap around the bottom so i resliced the file and now it has a nice flat base i then drilled 2 holes through the base and bolted onto the dome.. I bought 2 twist fit bulb holders as u can see in the pics, this fits through the dome nicely and fits inside the mosflash lense very snug, to change the bulb just unscrew the cage.
    

    222 downloads

       (0 reviews)

    0 comments

    Submitted September 18, 2022

14. 

    Free

    Renegade Dalek Plunger

    By DrBullas

    Just printed off a file a work colleague created for me from the Renegade Dalek Plans plunger drawing, printed in semi flexible black it looks pretty good! Printed off nice a slow didn't need supports.
    

    11 downloads

       (0 reviews)

    0 comments

    Submitted September 12, 2022

15. 

    Free

    Goon X Eye - As Per PDF Plans.

    By ansonjames

    Supports required front/back of the eye, remove supports on these parts and insert the ring which aligns both parts.
    If the part layout is too big for your print bed just "select all" and "ungroup" in Microsoft 3D builder.
    Parts are oriented for best printing speed and quality - 20% infill, 3 perimeters recommended. 
    11MM diameter hole is for the eye stalk/pivot files which are located here;
     
    The finished prints are kept together with an M10 threaded bar and nuts.
    
    

    19 downloads

       (0 reviews)

    0 comments

    Updated August 14, 2022

16. 

    Free

    Dome sander

    By kevin pedley

    This is a sanding pad that is concave on the sanding face - to match the radius of the original Shawcraft domes.
     
    It allows finish sanding without loosing the profile. 
     
    After printing (recommend printing it on it's edge to get a better concave profile) strips of wet and dry are glued to the surface, and away you go.
     
    Sand with a  circular motion. It maintains the edge between the radius and the taper of the dome.  
    

    35 downloads

       (0 reviews)

    0 comments

    Updated July 17, 2022

17. 

    Free

    Dalek Gatling Gun

    By RattyVulcan

    These files allow you to build a version of the Gatling Gun which includes integrated pistol grip and a housing for a motor and electronics to replicate the lights and spinning effect of a 'real' gatling gun as it slows due to friction.
     
    More details can be found here: 
     
    

    313 downloads

       (1 review)

    0 comments

    Submitted June 28, 2022

18. 

    Free

    Imperial Dalek: Gun Box Surrounds

    By Necrosis

    This is a download for the Imperial Dalek Gun Box Surrounds. The files are in .stl format making them easy to 3D print or to use as digital references/models. This part is 1:1 scale and match the most recent revision of the Imperial Dalek plans making it plug and play to print or easy to scale to your Daleks needs. I personally 3D printed these units to create a mold that allows me to cast the part with perfect detail, SLA printers work great to get to that finished look quicker. As noted in the plans; the original props where easily damaged during filming do to the ball joint openings being thin, I would suggest slightly flexible resin for casting or 25% infill for plastic printing to give greater resistance to stress. The parts look great as 3D prints alone with some filler and primer and detail work. The surround piece has a 101mm recess in it to allow a 100mm ball joint to stick out as they do in the show. Included in the download is another file that is the same but without the recess for those that don't want it. Recommend printing these parts slow and precise at 15% or 25% infill for best results.
    (Would love to see any print results from anyone who chooses to share on this thread)
     
    Details:
    Scale - 1:1 (In compliance with Imperial Dalek Plans Version 3.5)
    Parts included in this download - Gun Box Surround w/recess - Gun Box Surround w/no recess
     
    I will keep these files up to date and if you have any suggestions or find any errors please let me know so that I may update the parts.
    

    33 downloads

       (0 reviews)

    1 comment

    Updated February 8, 2022

19. 

    Free

    NSD Plunger EMA Parts

    By DalekDucky

    There are lots of great NSD plungers in the PDF, this ZIP file is of all the various EMA parts pre cut to build your own Plunger.
    This also allows you to decide if you want the two "cuts" on the plunger to be aligned or not.
     
    Modifications are:
    added a groove in VHH-450 tp allow to center VX-225, added grooves in VHD-475 to center VHH-450 with minimal filler Added small cut at top of VHH-425 for more surface when affixing VT-32 Optional, created a spacer to place between the two VX-40 Optional, insert for the arm to help affix to your arm  
    You will need to print 4x KW-12 and 2x VX-40
     
    Of possible use, As I am still calibrating my printer, to make the sanding easier, I Printed
    VHH-400 and VHH-425 so the inside would be facing up to make sanding from support easier, and KW-12 were flat  
    Enjoy and Happy Building 
    
    

    100 downloads

       (1 review)

    0 comments

    Updated January 10, 2022

20. 

    Free

    "Eve of the Daleks" Gatling Gun for NSD. Full Size, Rotating

    By threegringos

    This is the NSD "Gatling Gun" weapon as seen on the trailers for the 2022 New Year's episode "Eve of the Daleks".
    This 3D model was made before the episode aired, so the scren shots were very limited.  It looks accurate to my eye, however more details may become apparent once we get to see the entire episode.
    I used Fusion360 to create this model.  It's split into multiple parts for ease of printing.
    You will need to provide a 25.4mm (1 inch) diameter pipe for the arm, and also mount a suitable 102mm (4 inch) ball-joint.  I always use magic 8-ball toys for my ball joint.
    The eight small pipes coming out of the rear of the gun part are 6mm diameter.  You can either print them from my files, or optionally use stainless steel drinking straws, cut to length.
    I did include an internal gear in the main body of the gun, and an additional pinion gear in case somebody wants to motorize the rotation of the weapon.  I haven't had time to figure that out yet.
    

    126 downloads

       (2 reviews)

    3 comments

    Updated December 28, 2021

21. 

    Free

    NSD Light Cage with Thread

    By DalekDucky

    NB: Single zipped folder or 6 individual files - your choice
     
    So I wanted a light cage that did not show screws when assembled and came up with this solution. 
     
    It's essentially a remix of @Ultrastar Light cage with the following modifications. 
    Added thread to the lower part of the cage plus the inner part of the threaded piece to be attached to the Dalek head The hole for the base and top is slightly larger to make screwing around the cage easier no change to his support  
    In this file I also included the surround part I did for my bulb using a trailer light. The spring from the light lid holds it in place to the lower part so no attachments required.
    I used a Ping Pong bulb inside the moflash. so you may want to use some hot glue to secure that part. 
    The lower part has indentation to allow for my trailer base, if you don't need that, that part is low enough that should not be seen in your cage. 
     
    Enjoy  
     
    P.S. You will need to rotate a few pieces for print. support needed for some parts depending on your printer calibration. 
     
     
    
    

    158 downloads

       (0 reviews)

    4 comments

    Updated November 25, 2021

22. 

    Free

    Oil Seal Surround for 100mm hemis

    By napier1973

    ok i jumped on cad and changed the surround a little so it fit the 100mm hemisphhere only changed is the walls thicker.
    

    82 downloads

       (0 reviews)

    0 comments

    Submitted September 19, 2021

23. 

    Free

    Alternative Dome Light Cages for use with Quilted Mason Jars

    By anthony lathrop

    Instead of the canonical MoFlash dome light lenses, my son and I used 1/4 pint quilted Mason jars (widely available in the US, not sure about elsewhere).
    The jars are a bit shorter and squatter than the MoFlash lenses and they have a diamond embossed pattern instead of the vertical grooves - but they look pretty close and behave  similarly when lit from inside.
    These files comprise dome light cages that fit the Mason jars.
    The .stl files are low poly.
    Also including the solidworks files so you can make your own high poly .stl files if desired.
    

    42 downloads

       (0 reviews)

    0 comments

    Submitted August 29, 2021

24. 

    Free

    NDP Telescoping Joint

    By bryanxiii

    This is the joint you see at the midsection of the telescoping plunger arm.
    Measurements based on NDP Plans. 
     
    I added a tube at the bottom to push into the larger portion of the plunger arm to help secure it and have something to glue to.
    The OSD of addon tubing is 27mm.  
    The ISD overall is 18mm to give 1mm of clearance on the 17mm OSD telescoping tube.  
     
    Print orientation: I would suggest printing this with the tapered section down with a build plate.
     
    Density: My suggestion on this is 100% mainly to give strength to the section where it gets glued on.   
     
    If you need an alternative sizing version PM @bryanxiii 
    

    17 downloads

       (0 reviews)

    0 comments

    Submitted August 24, 2021

25. 

    Free

    NSD Eye Front

    By Mr McGoo

    I created my own CAD files for the NSD eye to print because I wasn't happy with any that I found, they all needed some unsightly supports.
     
    I designed these to be easy print (I did mine on an Ender 3, came out great) The front section doesn't need supports, orientate it so the front section faces up and it'll print nicely. The back section needs a support in the middle to print the stem, which broke off easily for me. Tolerances are pretty tight and will need some light sanding to make it a little looser. Then you just have to drill your holes for your allen bolts and you're good to go!
    

    106 downloads

       (1 review)

    0 comments

    Submitted August 11, 2021