Files For 3D Printing

245 files

1. 

   Free

   Dalek Destiny Bomb

   By Luke S

   I just finished making my other 3d print of the Dalek Destiny Bomb. I notice people were looking what the bombs were, but could not find what it was, So i decide to make this. The Yellow band Is Not in the File! You should use yellow paper like the prop did!
   If you find that its measurements should be changed then tell me and I will update them. 
   IF You have Downloaded any of my Prints please Pm if I have added or edited it, so i can send you the newest copy. 
   Unauthorized sales and distribution, in any format, is strictly prohibited.
    
   Print Settings
   Printer brand:
   Creality
   Supports:
   Yes
   Resolution:
   0.1mm
   Printer:
   Ender 3
   Infill:
   100%
   Filament_brand:
   Filament_color:
   red
   Filament_material:
   PLA
   

   37 downloads

      (0 reviews)

   1 comment

   Updated April 7, 2020

2. 

   Free

   Mk1 Gun Rods

   By Luke S

   So here my version of a mk1 gun rod, kinda like a clear acrylic one. You can print it colored or clear filler. The Rings, Rods, Octagons are separate pieces, so you can put it together easily and with the octagons not with it and giving you a hard time trying to paint it.  The Gun Cylinder has pre cut holes for the rods to fit in. 
   Print Settings
   Printer brand:
   Creality
   Supports:
   Yes
   Resolution:
   0.1mm
   Printer:
   Ender 3
   Infill:
   100%
   Filament_brand:
   Filament_color:
   white, Black, gray
   Filament_material:
   PLA
   

   180 downloads

      (0 reviews)

   0 comments

   Updated April 7, 2020

3. 

   Free

   Classic Dalek Appendages Cutting Torch Kit

   By Luke S

   A Zip File of the whole items is in the download to save up download room.
    
    The 10mm tube is 350mm long.
   I Made the Cutting Torch From the First Dalek Story when they cut the door down. This come with everything besides the 10mm tube and bendy tube. The Tube in the Screen Shots are just to show you what it looks like. Also The Colors in the screenshot are what you could spray paint it, besides the yellow tube, spray that black.
   IF You have Downloaded any of my Prints please Pm if I have added or edited it, so i can send you the newest copy. 
   Unauthorized sales and distribution, in any format, is strictly prohibited.
   Print Settings
   Printer brand:
   Creality
   Supports:
   Yes
   Resolution:
   0.1mm
   Printer:
   Ender 3
   Infill:
   100%
   Filament_brand:
   Filament_color:
   white, Black
   Filament_material:
   PLA
    
   

   63 downloads

      (0 reviews)

   0 comments

   Updated April 7, 2020

4. 

   Free

   Classic Dalek Appendage Electrode Unit

   By Luke S

   A Zip File of the whole items is in the download to save up download room.
   I Made the Electrode Unit from The Chase. Noting really about this model but that you will need to make the coil around the prongs and they are blue just to let you know and that this may need to be split into parts. if anyone want to link the split up one in the comments go ahead.  You may just want to build this when 3d printing is stronger.  This in my opinion is the worst looking appendages I have made 
   IF You have Downloaded any of my Prints please Pm if I have added or edited it, so i can send you the newest copy. 
   Unauthorized sales and distribution, in any format, is strictly prohibited.
    
   Print Settings
   Printer brand:
   Creality
   Printer:
   Ender 3
   Infill:
   100%
   Filament_brand:
   Filament_color:
   white, Black
   Filament_material:
   PLA
   

   43 downloads

      (0 reviews)

   0 comments

   Updated April 7, 2020

5. 

   Free

   Classic Dalek Appendage Flame thrower

   By Luke S

   Here is My Second Classic Appendage Model.  This is the Flame Thrower seen from Daleks Master Plan. There nothing really other to say is to spray paint the inside black and the other side gray? Like How @moviedalek did his. the way to attach this to your is by glue it or adding a wooden circle behind it then screw it in. 
   Unauthorized sales and distribution, in any format, is strictly prohibited.
   

   21 downloads

      (0 reviews)

   0 comments

   Updated March 12, 2020

6. 

   Free

   Classic Dalek Appendage Seismic Detector

   By Luke S

   A Zip File of the whole items is in the download to save up download room.
   There are 7 parts, the Bottom Half, numbers, the top, white band,  outer gyro ring, inner gyro ring, and Diel. There are already to holes in the print for the dial thingy that spins and the rods that connect to the gyro. The holes for the rods in the print are 4 mm in diameter. US Also You may need to add washers around the pins to stop the rings from sliding off. Thanks to @James O and @Dave'O for there estimated gused blueprints. 
   IF You have Downloaded any of my Prints please Pm if I have added or edited it, so i can send you the newest copy. 
   Unauthorized sales and distribution, in any format, is strictly prohibited.
   Print Settings
   Printer brand:
   Creality
   Printer:
   Ender 3
   Infill:
   100%
   Filament_brand:
   Filament_color:
   white, Black
   Filament_material:
   PLA
    
   

   102 downloads

      (0 reviews)

   1 comment

   Updated April 7, 2020

7. 

   Free

   MK1/2/3 & Movie 1/2 Stalk/Pivot Set!

   By Luke S

   So you have a budget , or don't know how to taper wood.
   A 18mm hole has been added so that you can use them, if you just used the eyestalk without a 18mm rod it would break from the weight. 
   So  I used the Mk1 Dalek Blueprints to Make these models.
   IF You have Downloaded any of my Prints please Pm if I have added or edited it, so i can send you the newest copy. 
   Print Settings
   Printer brand:
   Creality
   Printer:
   Ender 3
   Infill:
   100%
   Filament_brand:
   Filament_color:
   white, Black, Gray
   Filament_material:
   PLA
   

   194 downloads

      (0 reviews)

   0 comments

   Updated April 14, 2021

8. 

   Free

   MK1 Dalek Hemis

   By Luke S

   I Just made this for people who want a rim around there hemis to fit in the skirt perfect. Its Hollow in the Inside to save some of your print. IF you Don't have a Printer In America You can use this site to print it https://www.sculpteo.com/en/upload/
   

   47 downloads

      (0 reviews)

   0 comments

   Updated April 3, 2020

9. 

   Free

   NSD sphere for gun or plunger

   By Mr zen

   NSD gun / plunger barrel sphere the hole can be altered to suit  the diameter of the tube your are using for your build. when fitted i used felt to stop any friction when in place 
   

   111 downloads

      (0 reviews)

   2 comments

   Updated March 6, 2020

10. 

    Free

    End for NSD Dalek Gun

    By Mr zen

    Dalek Gun end to fit in the gun barrel.
    

    47 downloads

       (0 reviews)

    0 comments

    Submitted February 15, 2020

11. 

    Free

    NSD EyeStalk Disks

    By Luke S

    Here's my way of giving back to Project Dalek. There are 3 disk in the Set, each different sizes. Each are scaled from the Plans. This is my First 3d Printed Model, If this goes well i might make some more 3d prints. When I made these there is a flat bottom to them so, you may want to cast them in fiberglass molds or something. to make them hollow/curved in the inside. I wish you the best of luck of building your Dalek!
    

    211 downloads

       (0 reviews)

    0 comments

    Updated February 7, 2020

12. 

    Free

    Movie Dalek Claw

    By Aaron J Climas

    Here's a quick STL of half the claw that should be 1:1 scale, with an 8mm hole at one end. 
    

    43 downloads

       (0 reviews)

    0 comments

    Submitted February 3, 2020

13. 

    Free

    NSD Eye EMA Parts

    By Chris Moliere

    These are 3d models of the individual pieces of the NSD's eyeball. They were created using the CAD files in our downloads sections. Do to the small size of some the parts, I would recommend SLA or other forms of resin 3d printing. I also made a version of the VT-400 with the MRH-160Ps attached, in case the parts are too small to print individually. Enjoy!
    

    53 downloads

       (0 reviews)

    0 comments

    Submitted February 2, 2020

14. 

    Free

    SWD Gun Parts

    By bryanxiii

    .STL files for a Special Weapons Dalek based on some blue prints I found on this site, you will also have to slice the file for your printer, 
    These were made using tinkercad, please also note that the centre whole on the barrel is set to 50mm or around 1 1/2", the plan calls for a central pipe of 1 3/4", I however was unable to source an pipe in that size so I sized down. 
    

    65 downloads

       (0 reviews)

    0 comments

    Updated January 5, 2020

15. 

    Free

    TDP Neck Rings - Corrected Files

    By MechDesign

    Although these may have been posted before I've designed these with internal coring that ends up with just over 55% less material.
    The "base" pieces are the solid rings underneath each level of the structure, Ring1 is on the bottom.
    8 pieces of each will need to be printed. The longest dimension is a tad over 8.5 inches so this can be done with larger format printers.
    If you have the capability to manipulate the imported STL files I suppose you could cut them in half and print them on a smaller frame printer.
    Nigel was able to print a 2 rib partial piece of Ring1 so I'm going under the assumption that he can print a full sized set. In fact he will be doing this set for his new dalek this next year.
    

    43 downloads

       (0 reviews)

    2 comments

    Updated December 5, 2019

16. 

    Free

    3d printable NDP Shoulders

    By Chris Moliere

    Here it is! This thing took an eternity to design, and would have taken much longer if the Loft tool didn't exist. There are 66 bodies in this, which I might need to rename soon, but I think their size will help with their placement. Enjoy!
    

    179 downloads

       (0 reviews)

    4 comments

    Updated December 3, 2019

17. 

    Free

    TDP Dome - Whole STL, Plus Meshmixer Cut STL Files

    By TimW

    I drafted a TDP dome based on the plans from the forum using Fusion 360, diameter 500mm, height 190mm, arc radius 260mm. I used the revolve function from a sketch to get the dome shape then punched a hole in it where the eye is to go. I split up the dome STL into about 17 pieces (the number varied with on various attempts) using Meshmixer (top tip use plane cut with Cut Type - slice and Fill Type - remeshed fill.
    

    66 downloads

       (0 reviews)

    0 comments

    Submitted October 26, 2019

18. 

    Free

    3d Printable Shawcraft Skirt

    By Chris Moliere

    I scaled this model for my Prusa Mini, in order to print all the parts for it. I designed this to use for making a fiberglass mold, but with some modification, it might be able to be actually be used on a prop. However, if you decide to do so, you would most likely need to print the parts with 100% infill for push-through hemis. Enjoy!
    

    492 downloads

       (0 reviews)

    0 comments

    Submitted October 21, 2019

19. 

    Free

    Heronrib Panels

    By WhosWho

    3D printable panels based on Heronrib matting for use in NSD neck bins. Includes two different versions with different gap alignments.
    

    148 downloads

       (0 reviews)

    0 comments

    Submitted September 21, 2019

20. 

    Free

    Moflash Lens

    By WhosWho

    A hi res STL based on the Moflash lenses used New Paradigm and New Series Daleks.
    

    134 downloads

       (0 reviews)

    1 comment

    Submitted September 8, 2019

21. 

    Free

    NSD Supreme Parts

    By Chris Moliere

    This is a set of 3d printable parts for the NSD Supreme, using a combination of photos of the original prop from episodes and events, @acrylikhan and @bec weir's build diaries, and some of the dimensions listed in the plans. It was very difficult, given that the plans only give a rough approximation of the measurements. The parts here are the the bases for the front and side clamps, the clamps themselves, the neck furniture, and the light plinths. Enjoy!
    

    195 downloads

       (0 reviews)

    0 comments

    Updated July 10, 2019

22. 

    Free

    1/10th scale Dalek Hemisphere

    By Pugsy

    dalek bump.STL, modelled for a 1/10th scale dalek but can be scaled up if needed, hopefully will be of use to somebody 
    

    25 downloads

       (0 reviews)

    0 comments

    Updated July 5, 2019

23. 

    Free

    1/10th scale Dalek dome

    By Pugsy

    dalekdome.STL, modelled for a 1/10th scale dalek but can be scaled up if needed, hopefully will be of use to somebody
    

    29 downloads

       (0 reviews)

    0 comments

    Updated July 4, 2019

24. 

    Free

    Full Scale Shawcraft Dalek Dome Model and Negative

    By Omeganinjaboy

    The dome is based on the Version 3.1 Movie plans (so the eye slot is higher than other classic domes), though the negative and back half files are consistent with other classic domes dimentionally. You could just print two back halves if you do not want a movie dome and cut the eye slot yourself. I would advise you consult the dome dimentions in the Version 3.1 Movie plans and compare them against the dimentions of your own plans if you are building a different classic dome.
     
    This is a 3D printable Dalek dome model that has a curved eye slot rather than a rectangle extruded one making it more accurate to the real thing (It took quite a while to figure out how to make a hole based on a curved measurement in CGI). The front and back halves are provided, but you will have to slice it up if the model is bigger than your printer's build volume. The skinny dome is half an inch (1.27cm) thick and the normal one is one inch (2.54cm) thick. There are lower poly and higher poly (HD) variants of most files. A negative of the dome is also included for you want to use however you wish.
    

    336 downloads

       (0 reviews)

    13 comments

    Updated January 4, 2022

25. 

    Free

    Renegade_Dalek_Kit.zip

    By audrey2

    I ended up modifying quite a lot of the pieces so they now all fit together and print really well. It's a great balance between detail and ease of construction. So I have no doubt that any member of Project Dalek would be able to assemble it. It's a great deal simpler than the NSD, which was more designed for me with other people being able to assemble it simply being an afterthought.
    As such I've created an instruction manual for anyone interested in either putting the model together or simply seeing how it was designed.
     
    Renegade Dalek Instruction Booklet.pdf
    

    235 downloads

       (0 reviews)

    1 comment

    Updated June 6, 2019