-
Registration
Please register an account to access the Forum topics and features.
An Active Membership subscription gives you access to extra features and exclusive content!
Choosing Active Membership is a great way of supporting the community and showing your appreciation for our resources.
Please note that you need to register BEFORE you can use Facebook, Twitter or Google as a sign in method.
Files For 3D Printing
Files that can be used to for 3D printing physical versions, using your own printer or a service such as Shapeways etc.
Note that files for CNC and laser cutting can be found in their own sub-section, inside.
246 files
-
Free
"Eve of the Daleks" Gatling Gun for NSD. Full Size, Rotating
By threegringos
This is the NSD "Gatling Gun" weapon as seen on the trailers for the 2022 New Year's episode "Eve of the Daleks".
This 3D model was made before the episode aired, so the scren shots were very limited. It looks accurate to my eye, however more details may become apparent once we get to see the entire episode.
I used Fusion360 to create this model. It's split into multiple parts for ease of printing.
You will need to provide a 25.4mm (1 inch) diameter pipe for the arm, and also mount a suitable 102mm (4 inch) ball-joint. I always use magic 8-ball toys for my ball joint.
The eight small pipes coming out of the rear of the gun part are 6mm diameter. You can either print them from my files, or optionally use stainless steel drinking straws, cut to length.
I did include an internal gear in the main body of the gun, and an additional pinion gear in case somebody wants to motorize the rotation of the weapon. I haven't had time to figure that out yet.
126 downloads
-
Free
1/10th scale Dalek dome
By Pugsy
dalekdome.STL, modelled for a 1/10th scale dalek but can be scaled up if needed, hopefully will be of use to somebody
29 downloads
(0 reviews)0 comments
Updated
-
Free
1/10th scale Dalek Hemisphere
By Pugsy
dalek bump.STL, modelled for a 1/10th scale dalek but can be scaled up if needed, hopefully will be of use to somebody
25 downloads
(0 reviews)0 comments
Updated
-
Free
1960s Egg Cup
By monkeytennis
This model comprises a 1960s egg cup model used on the Daleks between The Chase and The Evil of the Daleks.
I own a set of original egg cups and this model was made using measurements from the actual item.
It's in OBJ format. There is a second object in the file. This is a cube of precisely one meter in all dimensions. This is an aid for scaling if necessary.
51 downloads
-
Free
2005 Dalek Eye Discs
By jbourd
Here is all three different size eye stalk plates for the 2005 Dalek.
Hope they work well, they were found on thingverse.
100 downloads
-
Free
2005 Hemispheres
By ddoherty958
I wanted to give something back to PDF, so here are my NSD (2005) Hemis. I used the early dimensions because it'll use less filament, but it's only a 2mm difference.
64 downloads
(0 reviews)0 comments
Submitted
-
Free
2005 NSD Dalek Dome
By Will Ransom
very nice and detailed file of the 2005 redesign of the dalek from doctor who
12 downloads
(0 reviews)0 comments
Updated
-
Free
2005 Plunger
By elmoray
I wanted to give back to the group...
Here is a version of the 2005 plunger that I made for my Dalek. You can find more info on Thingiverse: http://www.thingiverse.com/thing:210939
316 downloads
-
Free
(0 reviews)0 comments
Submitted
-
Free
2005 series hemisphere
By Snape757
2005 series hemisphere, add an extrusion to the bottom for the thickness of your material, or ask me and I will.
98 downloads
(0 reviews)0 comments
Submitted
-
Free
(0 reviews)0 comments
Submitted
-
Free
2005 Slats
By ddoherty958
These are the 2005 full size slats. I had some difficult with the rear of the wide slat, It may need sanding to get a good fit. I may upload a second version once I get it on my NSD.
Enjoy!
296 downloads
(0 reviews)0 comments
Updated
-
Free
300mm_ISD_Gun_Collar.skp
By Ferrain
This sketchup file produces a 3D model of a robust (chunky) classic gun rod collar when exported to STL & the 3D printer of your choice.
The reason I have uploaded it as a Sketchup file (in a zip format), is that if you select the whole model, then press , the model is surrounded by a cube which allows you to increase or decrease the overall model size, allowing you to tailor the inside diameter of the collar, to the outside diameter of the gun barrel.
It allows for about 5mm depth of support for a gun rod (once drilled out to suit your rods) to be affixed with epoxy resin of similar.
Earlier versions of the file produced one defective gun rod support - This model has extruded all pushed all the outer faces of the supports back into the main collar in a attempt to correct that defect. Should that not be the case, then I will create a new model when I get chance.
In HQ 0.1mm layer height & 5% infill it takes about 1.2 hours to print on a Makerbot Replicator 2.
39 downloads
-
Free
3d printable NDP Shoulders
By Chris Moliere
Here it is! This thing took an eternity to design, and would have taken much longer if the Loft tool didn't exist. There are 66 bodies in this, which I might need to rename soon, but I think their size will help with their placement. Enjoy!
179 downloads
-
Free
3d Printable Shawcraft Skirt
By Chris Moliere
I scaled this model for my Prusa Mini, in order to print all the parts for it. I designed this to use for making a fiberglass mold, but with some modification, it might be able to be actually be used on a prop. However, if you decide to do so, you would most likely need to print the parts with 100% infill for push-through hemis. Enjoy!
492 downloads
(0 reviews)0 comments
Submitted
-
Free
3d Printed Plunger
By Jack Grace
A 3d Print file for a Plunger, may be a little angular but nothing an upscale and some sandpaper can't fix. Already has a hole in the bottom for any screws or axles or whatever your classic dalek has planned. The lip was crafted by yours truly to match the standard movie dalek, but can be used on any classic dalek.
I'm super excited because it is one of the first 3d design files I created on my own, but feel free to modify it however you want.
8 downloads
(0 reviews)0 comments
Submitted
-
Free
70's Dalek Eyes 1 - Day of the Daleks high poly STL.
By ansonjames
No supports required except for the back of the eye, remove supports on this part and insert the ring which is for aligning the front and the back of the eye.
If the part layout is too big for your print bed just separate the parts in printing software or import into Microsoft 3D builder (free software) edit file and split keeping both top and bottom.
Parts are oriented for best printing speed and quality - 20% infill, 3 perimeters recommended. Send me a PM if you need assistance!
11MM diameter hole is for the eye stalk/pivot files which I'll upload soon, the finished prints are kept together with an M10 threaded bar and nuts.
111 downloads
(0 reviews)0 comments
Updated
-
Free
70's Dalek eyes 2 - Genesis of the Daleks style eye
By ansonjames
No supports required except for the back of the eye, remove supports on this part and insert the ring which is for aligning the front and the back of the eye.
You may need to reduce the size of the joiner to 99% to help it fit into the recesses, do this in your slicer and scaling.
I recommend 20% infill and 3 perimeters. Send me a PM if you need assistance!
11MM diameter hole is for the eye stalk/pivot files which I'll upload soon, the finished prints are kept together with an M10 threaded bar and nuts.
76 downloads
(0 reviews)0 comments
Submitted
-
Free
Accurate plunger - high poly
By ansonjames
60's/70's Style plunger created using the newer plans. Can be printed with FDM or SLA.
I added a rod at the bottom to slide onto the last stage of the arm, if you don't intend to use this part then you can import into Microsoft 3D builder, go to edit and split model.
92 downloads
-
Free
Alternative Dome Light Cages for use with Quilted Mason Jars
By anthony lathrop
Instead of the canonical MoFlash dome light lenses, my son and I used 1/4 pint quilted Mason jars (widely available in the US, not sure about elsewhere).
The jars are a bit shorter and squatter than the MoFlash lenses and they have a diamond embossed pattern instead of the vertical grooves - but they look pretty close and behave similarly when lit from inside.
These files comprise dome light cages that fit the Mason jars.
The .stl files are low poly.
Also including the solidworks files so you can make your own high poly .stl files if desired.
42 downloads
(0 reviews)0 comments
Submitted
-
Free
ball joint clamps
By Simchet
Weapon ball joint clamps.
You need two of each part, 8 off M6x100mm hex head screws, 8 off M6 mashers, 8 off M6 wing nuts 8 off 3x15 countersunk woodscrews.
The clamps sandwich the 100mm diameter spheres. Put the M6 bolts into the captive sockets and then screw this onto the inside of the gun box. Fit the weapons, then the 2nd clamp ring and then the washers and wing nuts. Adjust how free/tight you want the weapon to be with the wing nuts.
CAD file is in RS Design Spark Mechanical format (free 3D CAD). If you change the extension to .sdoc then it will also open in Ansys Spaceclaim (not free) and maybe other CAD packages.
53 downloads
(0 reviews)0 comments
Submitted
-
Free
Cdngoose 2008 Davros
By cdngoose
Included in this package of STL files are all the parts I have printed off for my 2008 Davro's panel. Also included are the measured blueprints for each piece. This way you can ensure the parts are exact or re-size them to fit your panels. Please look to Cdngoose 2008 Davro's build for information on how they were created and used. All of these files were created for me by Phillip McNulty, I owe him a Huge Thank You for not only making me these STL files from his CAD drawings but for allowing me to share them with all PDF members.
All files were printed in PLA filament as well as the rubber boots were also printed in flexible PLA
Hope these help others in their building process. Though they do not make exact reproductions of the TV show parts I believe they are more than close enough that when fans take pictures while standing beside Davro's they will be very pleased!
Cdngoose
1,285 downloads
(2 reviews)0 comments
Updated
-
Free
Classic Dalek Appendage Electrode Unit
By Luke S
A Zip File of the whole items is in the download to save up download room.
I Made the Electrode Unit from The Chase. Noting really about this model but that you will need to make the coil around the prongs and they are blue just to let you know and that this may need to be split into parts. if anyone want to link the split up one in the comments go ahead. You may just want to build this when 3d printing is stronger. This in my opinion is the worst looking appendages I have made
IF You have Downloaded any of my Prints please Pm if I have added or edited it, so i can send you the newest copy.
Unauthorized sales and distribution, in any format, is strictly prohibited.
Print Settings
Printer brand:
Creality
Printer:
Ender 3
Infill:
100%
Filament_brand:
Filament_color:
white, Black
Filament_material:
PLA
43 downloads
(0 reviews)0 comments
Updated
-
Free
Classic Dalek Appendage Flame thrower
By Luke S
Here is My Second Classic Appendage Model. This is the Flame Thrower seen from Daleks Master Plan. There nothing really other to say is to spray paint the inside black and the other side gray? Like How @moviedalek did his. the way to attach this to your is by glue it or adding a wooden circle behind it then screw it in.
Unauthorized sales and distribution, in any format, is strictly prohibited.
21 downloads
(0 reviews)0 comments
Updated
-
Free
Classic Dalek Appendage Seismic Detector
By Luke S
A Zip File of the whole items is in the download to save up download room.
There are 7 parts, the Bottom Half, numbers, the top, white band, outer gyro ring, inner gyro ring, and Diel. There are already to holes in the print for the dial thingy that spins and the rods that connect to the gyro. The holes for the rods in the print are 4 mm in diameter. US Also You may need to add washers around the pins to stop the rings from sliding off. Thanks to @James O and @Dave'O for there estimated gused blueprints.
IF You have Downloaded any of my Prints please Pm if I have added or edited it, so i can send you the newest copy.
Unauthorized sales and distribution, in any format, is strictly prohibited.
Print Settings
Printer brand:
Creality
Printer:
Ender 3
Infill:
100%
Filament_brand:
Filament_color:
white, Black
Filament_material:
PLA
107 downloads
-
Top Downloads
Week
-
Free
-
Free
-
Free
-
Free
-
Free
Month
-
Free
-
Free
-
Free
-
Free
-
Free
Year
-
Free
-
Free
-
Free
-
Free
-
Free
All Time
-
Free
-
Free
-
Free
-
Free
-
Free
-
-
Recent File Reviews
-
Mark Sheriff 6
Excellent , looks great and very well designed , well thought out . thank you
-
Marc Harris 42
I'm in my 50s and have since I was a boy watching Dr Who in the 70s always dreamed of making a Dalek for fun, now I have the time and resources, along with your forum's help it's time to live that dream.
I have watched some of the members videos, and I am very impressed with what I have seen.
Long live the Who verse.
I will document my progress and share any innovations I make
-
Chris R 25
Great set of models that printed and fitted together really easily. Can't comment on accuracy as I'm no expert but very happy with the result
-
Dalek Hal 312
Great file, easy to print
-
doctorone 3
Great plan but the pivot does not print as it is not complete like the eye stalk
-
71Davros 2
These plans seem to be very concise and detailed. Hopefully, there shouldn't be any problems making the Dalek now.........
-
-
Download Statistics
-
Recent File Comments
-
By life size · Posted
I printed mine in PTEG, 235 nozzle, 60 Bed , no supports and it printed with no mess at all. I ran it at a 40 percent print speed, and the orientation was large cup facing down on my print. -
By John · Posted
See this FAQ topic for more on Downloads availability: -
By ChristmasDalek · Posted
Welcome to the forum! Sorry you have encountered a problem... While waiting for someone who knows more about the downloads section than I do to answer, you may find the explanation in @Johns answer to this thread: Be well, Kathy -
By tardis112 · Posted
Why am I not permitted to download this? -
By Mark Casto · Posted
This is such a useful file for the eye it is perfect for adding a fish tank led inside and looks great thank you. -
By DarthCranium · Posted
ok @Bodule. i apologize if i caused any issue. -
By Bodule · Posted
Hi @DarthCranium Can I suggest that you ask your question in the 3D Printer Discussions section of the forum please? https://www.projectdalek.com/index.php?/forum/209-3d-printer-discussions/ That section itself may be worth a read through, as is @ChristmasDalek's post above yours 👆 here as it may provide additional useful information on how to use the forum. -
By DarthCranium · Posted
What is a good size of 3D printer youd recommend if i wanted to make a dalek of my own? please let me know when able. Thanks -
By Dalek-Nik · Posted
Moflash lenses appear to be slightly difficult these days. the best bet in my opinion is 3D printing them. there are many accurate models here that can be printed on any FDM printer you can find. there is a chance that you can find the lenses online to buy, but those sites can be slightly sketchy. depending on the filament you buy and the printer you have/find, they can be produced fairly accurately. filament can come as cheap as 17 dollars, but do keep in mind that they can some -
By Chris R · Posted
Thanks for uploading these files. Printed really nicely with the odds and sods of filament I had around and very pleased with it, haven't done any tidying up or painting but it looks great as-is.
-
-
Highest Rated Submitters
No ratings this week.
No ratings this month.
-
1
-
2
-
3
-
4
-
5
-
1
-
2
-
3
-
4
-
5
-
-
Current Donation Goals
-
Finance the Forum Hosting 2024Raised 100.00 GBP
-
-
Top Templates
-
Free
-
Free
-
Free
-
Free
-
Free
-
