About This File
The Assembly Manual for the latest version of the Project Dalek voice modulator, written by @elembivos.
Note: This DVM7 Assembly Manual is the latest self assembly kit and supersedes the PDFMod Mk5e. Please do not mix and match anything between the two.
This manual gives you all the details you need to put together a voice modulator which sounds great, is cost effective and has the ability to be customised. You will need to source your own components in order to use this manual. However, PCBs and enclosures are available via the Forum. This booklet can also be used in conjunction with the files located here, which will allow you to order PCBs directly from a PCB manufacturer. If you have access to a 3D printer, you can print your own case/enclosure. The files to do this are located here. If you require a pre-made 3D printed enclosure, they can be purchased here.
Once you have built your DVM7 you will need to program it. The files required are located here.
This manual is also available to buy as a full colour printed booklet. Click here for details.
The printed circuit board (PCB) required to make this voice modulator is also available here or purchase both the manual and the PCB, here.