NSD Moflash lens 1.0.0

I truly believe the 3D printer is a Dalek builders best friend. Since the Moflash Lens is no longer available we can now print one. I used this file from Thingverse and it is quite acceptable. Below is the caveat for its use.

A close approximation of the Moflash lenses used for Dalek NSD dome lights. I do not have a real one, so attempted this for my own NSD.
Dimensioned to fit inside the housings described in the Project Dalek NSD plans.
Print in a transparent or semi-transparent material as desired.

Dalek NSD Moflash-style Dome Light Lens by miproductions is licensed under the Creative Commons - Attribution - Non-Commercial license.

So what's this mean?

Remixing or Changing this Thing is allowed.

Commercial use is not allowed.

Once again I did not create this file but I have used it and it needs to be available to PDF members.

cdngoose

Note: Above are the pictures I took during and after printing, first one is nearing the end of print and the second is print finished. The third one is with the filler removed while the last one is with a flashlight with weak batteries. all in all I prefer this look over the original Moflash unit, I like the silver finish and it glows nicely.. Once the light hits it their is an oddness about the silver glow that makes it far more Dalek worthy!

Enjoy, and with the discontinued production of these lenses take heart that we will have them forever now! Gone are the days of scrounging and pleading in back corners for obscure parts to make our obsession!

cdngoose