About This File
This is a download for the Imperial Dalek dome lights. The files are in .stl format making them easy to 3D print or to use as digital references/models. These parts are 1:1 scale and match the most recent revision of the Imperial Dalek plans making it plug and play to print or easy to scale to your Daleks needs. I personally 3D printed these units to create molds so that I can cast the parts. I cut the center piece from acrylic using the print as a template. However, the parts look great as 3D prints with some filler and primer and you can print the center disc from a transparent filament with out any hassle; SLA resin printers also work great for this kind of part. Recommend printing these parts slow and precise at 15% infill for best results.
(Would love to see any print results from anyone who chooses to share on this thread)
Details:
Scale - 1:1 (In compliance with Imperial Dalek Plans Version 3.5)
Parts included in this download - VHE-275 * Acrylic Disc * VT-250
NOTE: For ease of assembly, parts VT-250 and Acrylic Disc have 6.5mm holes through them, this allows a 1/4" bolt or 6.35mm bolt to go through and connect them; there are two recessed locations on part VHE-275 (Elliptical head) where the hex/head of the bolt can be mounted in place. This is not visible from the outside and ensure perfect placement of the parts and allows easier installation on the dome. All parts also have a 26mm hole in the center to allow the placement of a small bulb.
I will keep these files up to date and if you have any suggestions or find any errors please let me know so that I may update the parts.
Edited by RoboticREX
What's New in Version 1.0.0 See changelog
Released
This is a download for the Imperial Dalek dome lights. The files are in .stl format making them easy to 3D print or to use as digital references/models. These parts are 1:1 scale and match the most recent revision of the Imperial Dalek plans making it plug and play to print or easy to scale to your Daleks needs. I personally 3D printed these units to create molds so that I can cast the parts. I cut the center piece from acrylic using the print as a template. However, the parts look great as 3D prints with some filler and primer and you can print the center disc from a transparent filament with out any hassle. Recommend printing these parts slow and precise at 18%-20% infill for best results.
(Would love to see any print results from anyone who chooses to share on this thread)
Details:
Scale - 1:1 (In compliance with Imperial Dalek Plans Version 3.5)
Parts included in this download - VHE-275 * Acrylic Disc * VT-250
NOTE: For ease of assembly, parts VHE-275 and Acrylic Disc have 6mm holes to allow the 4.5mm rods of part VT-250 to slide through. This is not visible from the outside and ensure perfect placement of the parts. The Acrylic Disc and VT-250 also have a 26mm hole in the center to allow the placement of a small bulb.
I will keep these files up to date and if you have any suggestions or find any errors please let me know so that I may update the parts. These files are originals by me and are ONLY intended for the members of Project Dalek, please do not share or sell these files!