About This File
I downloaded the zip file from Ultrastar's downloads and noticed that 2 of the files were labelled wrong so corrected that with these files here, I also noticed when i had printed the base that when screwed on tight there was at least 5 mm gap around the bottom so i resliced the file and now it has a nice flat base i then drilled 2 holes through the base and bolted onto the dome.. I bought 2 twist fit bulb holders as u can see in the pics, this fits through the dome nicely and fits inside the mosflash lense very snug, to change the bulb just unscrew the cage.
Recommended Comments
There are no comments to display.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.