About This File
Mechanism to control elevation of eye stalk. Eye needs to be front heavy about pivot. At rear of eye tie on a piece of string, drill a hole through the mounting plate and thread the string through the hole. On the other (inside of Dalek side), screw on the outer tube with 3mm wood screws. Thread the string through outer tube, the inner tube and finally the plug. Adjust tension on the string by tying it to a nut (M6 is about the right size) which jams against the plug. T adjust tension so that when the handles are rotated into the slots, eye is level. Eye is elevated by rotating the handle and pulling down. Eye is dipped by rotating then raising the handle and letting the weight of the eye let itself down.
Recommended Comments
There are no comments to display.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.