-
Registration
Please register an account to access the Forum topics and features.
An Active Membership subscription gives you access to extra features and exclusive content!
Choosing Active Membership is a great way of supporting the community and showing your appreciation for our resources.
Please note that you need to register BEFORE you can use Facebook, Twitter or Google as a sign in method.
Files For 3D Printing
Files that can be used to for 3D printing physical versions, using your own printer or a service such as Shapeways etc.
Note that files for CNC and laser cutting can be found in their own sub-section, inside.
248 files
-
Davros-Hand Bar, RH.stl
By jaguwa68
Right side of the hand bar on the Bleach Davros console. Intended to be used with a 16mm diameter steel tube core.
11 downloads
0 comments
Submitted
-
Davros-Shoulder Clamp Former.stl
By jaguwa68
Former that mates to the shoulder boss (handed part). Has rebates to take foam edge inserts which can be wrapped in leather, and a top insert to be cut from separate sheet (metal or plastic)
17 downloads
0 comments
Submitted
-
Eyestalk to Eye adapter (25mm pipe to printed NSD eye)
By ddoherty958
I made this to allow my printed eye to attach to my 25mm pipe. There's a hole in the center to allow wires from the bulb pass through.
Short side diam: 16mm
Long side diam: 25mm
15mm height on each side.
45 downloads
0 comments
Updated
-
Renegade Dalek Styled 3D Print
By Zach
The body of a dalek loosely based on the Renegade dalek. The whole thing can be printed in one go. I printed it at 50% scale with 20% infill and it came out great. The three holes are for the eye and turrets; I haven't yet finished modeling them, but when I do I will add the files here.
6 downloads
0 comments
Submitted
-
Movie Dalek.zip
By iansarian
Hi
Here is my version of the Movie Dalek Dome, Neck, Eye, Gun and Claw Arm stls based on the forum plans.
The files are designed to be printed on a small printer with a print bed 220x220.
Regards
Ian
33 downloads
0 comments
Updated
-
0 comments
Submitted
-
Davros-Shoulder Clamp Boss LH.stl
By jaguwa68
Left hand boss that take 2x 40x20mm box section sliders and mates with the shoulder clamp former.
13 downloads
0 comments
Submitted
-
mk3 or "Egg Cup" lights
By Sparky_Butane
Here are the files for 3D printing the mk3 dome lights. If you have any questions or comments please message me.
Thanks and Enjoy
102 downloads
0 comments
Submitted
-
Invasion Earth: 2150 A.D Eyestalk Pivot
By cdngoose
This file is the Eyestalk Pivot without a flat spot as seen on Invasion Earth Dalek . Phil has kindly donated his time to help out with drawing this part with new features,
NOTE* picture presently shows flat spot that has been eliminated.
Eye pivot
1" hole for eyestalk shaft
Smaller centered 3/8ths hole for threaded bar
Slot for threaded bar nut.
Hole through the backside to the slot for wiring.
3/8ths hole centered for pivot
29 downloads
0 comments
Updated
-
NSD dome rotation gears
By Nimitz
This gear and pinion is designed to fit a Lazy Susan which has a diameter for the inner ring of 415mm. This Lazy Susan is the perfect size to be used on an NSD dome. it may work for other domes but I've not tested it with anything but an NSD dome. You'll need to print 2 pieces of both the "A" & "B" parts. the ends have lap joints for stability and the countersunk holes are for 10-32 size bolts. the height of the gear has been designed so that you can leave the rubber feet that come with the lazy susan on the inner ring in place and the gear will be the same height. you will need to drill holes in the gear where your rubber feet are so it will sit flush with the bottom of your dome rotation plate.
Note: the picture shows the gear sitting on the top of the dome rotation plate but that was just to take the picture. the gear is mounted on the underside of the dome rotation plate which is why it is the same height as the rubber feet on the inner ring so it sits flush
73 downloads
0 comments
Updated
-
NSD Hemisphere mounting
By Prefect1938
Hello,
Hope you are all doing well. Please find attached my mounting for the hemispheres, like others I went for the 100mm bobbles which are nice but not very robust. To overcome this a bit and also help mount them I designed this mounting which incorporates a backing for the bobble so that it can be glued to it and therefor strengthening it considerably. It's so strong in fact that I can stand on it with my full Dad weight without it crushing, and yet it only weighs 41g! I have incorporated a hole though it so that a 5mm bolt or threaded rod can be simply screwed in to mount it to the skirt. It requires no supports, no brim and only 5% infill. I can print 4 at a time in 24hrs, increasing the printer speed to 120%. If you print it in black there is no further finishing required other than to fit your painted half bobble. I suggest printing one as a test to check it is a good match for your bobbles and if not a slight % change should be enough. A good test is to put a little blue-tack on the frame and to check that it is well squished when fitting the bobble. Please note the following Cura Standard setting over rides -
Wall line count - 2
Top layers - 4
Bottom layers - 8
Infill density - 5%
Infill pattern - Triangles
Support - None
Build adhesion - None
Any questions or comments very welcome.
Thanks, Scott.
11 downloads
0 comments
Updated
-
Drew' TDP 3D Model
By SketchTwitch
Hello everyone! I realized that there isn't a lot of files for the TDP build as it isn't as loved as the classic or 2005 Dalek models. Since I decided that I wanted to make the TDP as my first dalek build, I went ahead and modeled one of the plans from the forum. Attached is the zip file with all the parts individually, as well as a fully assembled model as STLs, at full size, though you can find the model on Onshape at: This link here incase you just want something specific.
I haven't printed anything myself yet besides the plunger at 50% just to test my supports, I will be printing a split version of the neck rings and the shoulder model for my build! If anyone has any questions or request let me know!
23 downloads
0 comments
Submitted
-
Renegade Dalek Plunger
By DrBullas
Just printed off a file a work colleague created for me from the Renegade Dalek Plans plunger drawing, printed in semi flexible black it looks pretty good! Printed off nice a slow didn't need supports.
11 downloads
0 comments
Submitted
-
mk1 and 2 dome lights
By Sparky_Butane
Included are a solid and shelled files. They are as accurate as I could make them so please message me with any comments or questions.
Thanks and Enjoy
108 downloads
0 comments
Submitted
-
Davros-Plate, LH.stl
By jaguwa68
Base plate for my Bleach Davros air vent on the LH side of the console. Forms part of an assembly (to be used with vent centre dome and the upper and lower rings)
Davros-Plate, LH.stl Davros-Vent, Ring Upper.stl Davros-Vent, Ring.stl Davros-Vent, Centre.stl
11 downloads
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Updated
-
Scale NSD
By Mark Casto
Well, I have now printed out my first Dalek and I absolutely love it! Here are the gcode files for the Dalek and weapons sliced and ready to print if anyone else would like to print one out Im using the Ender 3 Neo and have just kept the standard setting. You will need to trim off the plastic around the weapons but it's no big deal the original Dalek is from Thingiverse if you want to give the creator a coffee awesome Dalek.
33 downloads
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
Davros-Vent, Ring.stl
By jaguwa68
Vent Assy Lower Ring
Davros-Plate, LH.stl Davros-Vent, Ring Upper.stl Davros-Vent, Ring.stl Davros-Vent, Centre.stl
6 downloads
0 comments
Submitted
-
Davros-Vent, Ring Upper.stl
By jaguwa68
Vent Upper Ring
Davros-Plate, LH.stl Davros-Vent, Ring Upper.stl Davros-Vent, Ring.stl Davros-Vent, Centre.stl
9 downloads
0 comments
Submitted
-
Davros-Hand Bar Bezel.stl
By jaguwa68
For connection of the hand bar to the console. Intended to be used with a 16mm diameter steel tube core.
9 downloads
0 comments
Submitted
-
Davros-Hand Bar, LH.stl
By jaguwa68
Left side of the hand bar on the Bleach Davros console. Intended to be used with a 16mm diameter steel tube core.
10 downloads
0 comments
Submitted
-
Customised 3D pieces for NSD from KiwiDoc's scrapmetaltron
By kiwidoc
(Oil Seal replica) Base for 100mm Acrylic hemis - press fit
Neck blocks with a better placement of the ball and angled back slot
Allan head bolt cap for fenders
40 downloads
0 comments
Submitted
-
Top Downloads
Week
-
Free
-
Free
-
Free
-
Free
-
Free
Month
-
Free
-
Free
-
Free
-
Free
-
Free
Year
-
Free
-
Free
-
Free
-
Free
-
Free
All Time
-
Free
-
Free
-
Free
-
Free
-
Free
-
-
Recent File Reviews
-
Michael56 4
I'm in my late 60's. I live in Australia and have always enjoyed Doctor Who from the very first episode aired here around 1965 when I was 9 years old. Thought how amazing it would be to have a Dalek but had no idea how or where to even begin UNTIL I came across this site. Thanks for giving me the opportunity to at least be able to start on a Dalek build and will detail my progress as it goes along.
-
Mark Sheriff 6
Excellent , looks great and very well designed , well thought out . thank you
-
Marc Harris 62
I'm in my 50s and have since I was a boy watching Dr Who in the 70s always dreamed of making a Dalek for fun, now I have the time and resources, along with your forum's help it's time to live that dream.
I have watched some of the members videos, and I am very impressed with what I have seen.
Long live the Who verse.
I will document my progress and share any innovations I make
-
Chris R 25
Great set of models that printed and fitted together really easily. Can't comment on accuracy as I'm no expert but very happy with the result
-
Dalek Hal 312
Great file, easy to print
-
doctorone 3
Great plan but the pivot does not print as it is not complete like the eye stalk
-