-
Registration
Please register an account to access the Forum topics and features.
An Active Membership subscription gives you access to extra features and exclusive content!
Choosing Active Membership is a great way of supporting the community and showing your appreciation for our resources.
Please note that you need to register BEFORE you can use Facebook, Twitter or Google as a sign in method.
Files For 3D Printing
Files that can be used to for 3D printing physical versions, using your own printer or a service such as Shapeways etc.
Note that files for CNC and laser cutting can be found in their own sub-section, inside.
248 files
-
NSD Hemi and Base
By tim hards
To give something back to this group, I have designed this hemi to fit the Complete NSD Scale Model by @audrey2.
I hope it helps anyone making this scale model.
Note : it will need a quick sand around the plug on the bottom to fit nicely into the skirt.
6 downloads
0 comments
Submitted
-
SKV-DVC-B101 DAVROS-BACKREST SPACER.stl
By jaguwa68
The lower centre backrest segment. These are quite large, so may take a day or so to print! (see drawing SKV-DVA-B001 for assembly sequence)
2 downloads
0 comments
Submitted
-
SKV-DVC-B102 DAVROS-BACKREST SPACER-MID.stl
By jaguwa68
The middle centre backrest segment. This is also quite large, so may take a day or so to print! (see drawing SKV-DVA-B001 for assembly sequence)
1 download
0 comments
Submitted
-
SKV-DVC-B103 DAVROS-BACKREST RIB LWR INR LH.stl
By jaguwa68
Lower LH inner rib segment (see drawing SKV-DVA-B001 for assembly sequence)
2 downloads
0 comments
Submitted
-
SKV-DVC-B104 DAVROS-BACKREST RIB LWR OTR LH.stl
By jaguwa68
Lower LH outer rib segment (see drawing SKV-DVA-B001 for assembly sequence)
1 download
0 comments
Submitted
-
SKV-DVC-B105 DAVROS-BACKREST RIB LWR INR RH.stl
By jaguwa68
Lower RH inner rib segment (see drawing SKV-DVA-B001 for assembly sequence)
1 download
0 comments
Submitted
-
SKV-DVC-B106 DAVROS-BACKREST RIB LWR OTR RH.stl
By jaguwa68
Lower RH outer rib segment (see drawing SKV-DVA-B001 for assembly sequence)
1 download
0 comments
Submitted
-
SKV-DVC-B120 DAVROS-BACKREST RIB UPR INR LH.stl
By jaguwa68
Upper LH inner rib segment (see drawing SKV-DVA-B001 for assembly sequence)
2 downloads
0 comments
Submitted
-
SKV-DVC-B121 DAVROS-BACKREST RIB UPR INR RH.stl
By jaguwa68
Upper RH inner rib segment (see drawing SKV-DVA-B001 for assembly sequence)
2 downloads
0 comments
Submitted
-
SKV-DVC-B122 DAVROS-BACKREST RIB UPR OTR LH.stl
By jaguwa68
Upper LH outer rib segment (see drawing SKV-DVA-B001 for assembly sequence)
2 downloads
0 comments
Submitted
-
SKV-DVC-B123 DAVROS-BACKREST RIB UPR OTR RH.stl
By jaguwa68
Upper RH outer rib segment (see drawing SKV-DVA-B001 for assembly sequence)
2 downloads
0 comments
Submitted
-
SKV-DVC-B125 DAVROS-BACKREST PINNACLE CAP.stl
By jaguwa68
A jazzed up version of the finisher cap for the centre posts (2 off required)
1 download
0 comments
Submitted
-
SKV-DVC-B128 DAVROS-SLEEVE BASE.stl
By jaguwa68
Base for the shoulder slider sleeves (see drawing SKV-DVA-B001 for assembly sequence)
1 download
0 comments
Submitted
-
Classic Dalek shoulders for 3d printing.
By captianboko
This for classic daleks and there is 2 version with and without chest bumps on the front of the shoulders.
(anyone can and should modify these if they so choose to)
18 downloads
0 comments
Submitted
-
ball joint clamps
By Simchet
Weapon ball joint clamps.
You need two of each part, 8 off M6x100mm hex head screws, 8 off M6 mashers, 8 off M6 wing nuts 8 off 3x15 countersunk woodscrews.
The clamps sandwich the 100mm diameter spheres. Put the M6 bolts into the captive sockets and then screw this onto the inside of the gun box. Fit the weapons, then the 2nd clamp ring and then the washers and wing nuts. Adjust how free/tight you want the weapon to be with the wing nuts.
CAD file is in RS Design Spark Mechanical format (free 3D CAD). If you change the extension to .sdoc then it will also open in Ansys Spaceclaim (not free) and maybe other CAD packages.
67 downloads
0 comments
Submitted
-
Eye stalk elevation control mechanism
By Simchet
Mechanism to control elevation of eye stalk. Eye needs to be front heavy about pivot. At rear of eye tie on a piece of string, drill a hole through the mounting plate and thread the string through the hole. On the other (inside of Dalek side), screw on the outer tube with 3mm wood screws. Thread the string through outer tube, the inner tube and finally the plug. Adjust tension on the string by tying it to a nut (M6 is about the right size) which jams against the plug. T adjust tension so that when the handles are rotated into the slots, eye is level. Eye is elevated by rotating the handle and pulling down. Eye is dipped by rotating then raising the handle and letting the weight of the eye let itself down.
31 downloads
0 comments
Submitted
-
NSD Gunbox side panels
By Mark Casto
These are the side vent panels for the NSD Dalek I made these for my fiberglass Shoulders as they were missing so hopefully they will be useful to someone. Be sure to print them in PETG as this will prevent them from warping in the hot sunshine when you are outside. I stuck them to the sides using arlidite then spray-painted them. It is a good idea to use Ronseal wood filler to smooth out the print lines and then sand them down before painting them.
11 downloads
0 comments
Submitted
-
New Dalek Paradigm 1:10 scale
By ozzymat
The New Dalek Paradigm is at 1:10 scale and is in several pieces to allow parts to be printed in different colours or if painting to reduce masking.
Parts are keyed to aid assembly.
Appendages can be either compleletly printed or as in the photo a combination of printed and 3mm aluminium tube.
Modelled in Fusion 360 using Project Dalek "New Dalek Paradigm" plans as a reference.
Link build log video: https://youtu.be/v0x_3M-idzg
12 downloads
0 comments
Submitted
-
SKV-DKC-SK141 Dalek Hemisphere Base
By jaguwa68
To be used in conjunction with Ø100mm polycarbonate Christmas decoration hemispheres or similar.
0 downloads
0 comments
Submitted
-
Lower Neck Ring for 2008 NSS
By Orion79
The lower neck ring assembly for the 2008 Supreme Dalek. Added alignment features to make assembly easier.
3 downloads
0 comments
Updated
-
Dalek Cannon
By simon83079
The dalek cannon from parting of the ways. Made to fit onto a 38mm tube, plastic, metal, what ever floats yer boat. Fits together well enough. Then comes the fun job of sanding down!
10 downloads
0 comments
Updated
-
Dalek Assault Claw
By simon83079
Replica of the assault claw from Parting of the ways. Already separated into printable parts.
14 downloads
0 comments
Submitted
-
Top Downloads
Week
-
Free
-
Free
-
Free
-
Free
-
Free
Month
-
Free
-
Free
-
Free
-
Free
-
Free
Year
-
Free
-
Free
-
Free
-
Free
-
Free
All Time
-
Free
-
Free
-
Free
-
Free
-
Free
-
-
Recent File Reviews
-
Michael56 4
I'm in my late 60's. I live in Australia and have always enjoyed Doctor Who from the very first episode aired here around 1965 when I was 9 years old. Thought how amazing it would be to have a Dalek but had no idea how or where to even begin UNTIL I came across this site. Thanks for giving me the opportunity to at least be able to start on a Dalek build and will detail my progress as it goes along.
-
Mark Sheriff 6
Excellent , looks great and very well designed , well thought out . thank you
-
Marc Harris 73
I'm in my 50s and have since I was a boy watching Dr Who in the 70s always dreamed of making a Dalek for fun, now I have the time and resources, along with your forum's help it's time to live that dream.
I have watched some of the members videos, and I am very impressed with what I have seen.
Long live the Who verse.
I will document my progress and share any innovations I make
-
Chris R 25
Great set of models that printed and fitted together really easily. Can't comment on accuracy as I'm no expert but very happy with the result
-
Dalek Hal 312
Great file, easy to print
-
doctorone 3
Great plan but the pivot does not print as it is not complete like the eye stalk
-