-
Registration
Please register an account to access the Forum topics and features.
An Active Membership subscription gives you access to extra features and exclusive content!
Choosing Active Membership is a great way of supporting the community and showing your appreciation for our resources.
Please note that you need to register BEFORE you can use Facebook, Twitter or Google as a sign in method.
Files For 3D Printing
Files that can be used to for 3D printing physical versions, using your own printer or a service such as Shapeways etc.
Note that files for CNC and laser cutting can be found in their own sub-section, inside.
248 files
-
Imperial Dalek: Eye Stalk
By Necrosis
This is a download for the Imperial Dalek eye stalk. The files are in .stl format making them easy to 3D print or to use as digital references/models. These parts are 1:1 scale and match the most recent revision of the Imperial Dalek plans making it plug and play to print or easy to scale to your Daleks needs. I personally 3D printed these units to create a mold that allows me to cast the part with perfect detail. You can achieve the center reflective disc by printing the part and then covering it with a reflective film as shown in the screenshots above. However, I prefer the none reflective disc on my personal Dalek build. The parts look great as 3D prints alone with some filler and primer and detail work. Recommend printing these parts slow and precise at 15% infill for best results.
(Would love to see any print results from anyone who chooses to share on this thread)
Details:
Scale - 1:1 (In compliance with Imperial Dalek Plans Version 3.5)
Parts included in this download - Eye Stalk * Eye Piece * Reflector * 4 Stalk Discs * Eye Pivot
NOTE: For ease of assembly, parts have a 0.5mm to 1mm tolerance. The eye Pivot has a 12mm (1/2") hole in the center for a bolt and a larger hole on the backside that can be used to attach a control rod for the eye stalk.
I will keep these files up to date and if you have any suggestions or find any errors please let me know so that I may update the parts.
49 downloads
-
Imperial Dalek : Dome Lights
By Necrosis
This is a download for the Imperial Dalek dome lights. The files are in .stl format making them easy to 3D print or to use as digital references/models. These parts are 1:1 scale and match the most recent revision of the Imperial Dalek plans making it plug and play to print or easy to scale to your Daleks needs. I personally 3D printed these units to create molds so that I can cast the parts. I cut the center piece from acrylic using the print as a template. However, the parts look great as 3D prints with some filler and primer and you can print the center disc from a transparent filament with out any hassle; SLA resin printers also work great for this kind of part. Recommend printing these parts slow and precise at 15% infill for best results.
(Would love to see any print results from anyone who chooses to share on this thread)
Details:
Scale - 1:1 (In compliance with Imperial Dalek Plans Version 3.5)
Parts included in this download - VHE-275 * Acrylic Disc * VT-250
NOTE: For ease of assembly, parts VT-250 and Acrylic Disc have 6.5mm holes through them, this allows a 1/4" bolt or 6.35mm bolt to go through and connect them; there are two recessed locations on part VHE-275 (Elliptical head) where the hex/head of the bolt can be mounted in place. This is not visible from the outside and ensure perfect placement of the parts and allows easier installation on the dome. All parts also have a 26mm hole in the center to allow the placement of a small bulb.
I will keep these files up to date and if you have any suggestions or find any errors please let me know so that I may update the parts.
21 downloads
-
PDF VOICE MOD HOLDER
By Kev Handley
I made this to stick inside my Daleks. It's a little on the large side so I can add neoprene inside to prevent rattles. I can now easily swap out my mods to my desired Dalek. Mine took about 8 hrs to print and used 85 G (28.35m) with tree supports.
I used No More Nails to stick this inside the front of the shoulder section of my NSD and it does the job as planned.
31 downloads
0 comments
Updated
-
Neck ring tri-foil holder
By MechDesign
This item allows the builder to drill a straight 3/4 inch hole in the neck rings instead of trying to drill 3 small 1/4 inch holes right next to each other at an angle. The angle of the holes puts the tri-foils at the same angle as the neck rings in the Shawcraft Movie Dalek Plans.
49 downloads
0 comments
Updated
-
Mk 3 Dalek Eyestalk - for my uploaded eye STL's.
By ansonjames
Eyestalk for my uploaded eye STL's.
Print Eye stalk bottom and eye pivot in the orientation it's presented in WITH supports, at least 20% infill and three perimeters is good.
No supports required for eye stalk top, it's been tested with the properly sized transparent acrylic tube which fits perfectly and has no play.
No glue required, just an M10 thread bar with two nuts for top and bottom.
Fire me a PM if you have an questions!
118 downloads
0 comments
Updated
-
70's Dalek eyes 2 - Genesis of the Daleks style eye
By ansonjames
No supports required except for the back of the eye, remove supports on this part and insert the ring which is for aligning the front and the back of the eye.
You may need to reduce the size of the joiner to 99% to help it fit into the recesses, do this in your slicer and scaling.
I recommend 20% infill and 3 perimeters. Send me a PM if you need assistance!
11MM diameter hole is for the eye stalk/pivot files which I'll upload soon, the finished prints are kept together with an M10 threaded bar and nuts.
79 downloads
0 comments
Submitted
-
70's Dalek Eyes 1 - Day of the Daleks high poly STL.
By ansonjames
No supports required except for the back of the eye, remove supports on this part and insert the ring which is for aligning the front and the back of the eye.
If the part layout is too big for your print bed just separate the parts in printing software or import into Microsoft 3D builder (free software) edit file and split keeping both top and bottom.
Parts are oriented for best printing speed and quality - 20% infill, 3 perimeters recommended. Send me a PM if you need assistance!
11MM diameter hole is for the eye stalk/pivot files which I'll upload soon, the finished prints are kept together with an M10 threaded bar and nuts.
111 downloads
0 comments
Updated
-
Egg cup dome light - high poly
By ansonjames
I was originally going to make a "Power of the Daleks" variant and so I created this file, I managed to pick up a few genuine egg cups and then decided to make a different Dalek altogether.
52 downloads
0 comments
Submitted
-
Eye Ring mk3.stl
By pugwash
The eye ring (white) should press and hold into place without glue on my Mk3 Eye
19 downloads
0 comments
Submitted
-
Eye Ball mk3.stl
By pugwash
It's possible to print the main body (black) in about 11 hours at 0.2 resolution on an Ender 3 with very little support around the base. Infill of 20% is plenty. I've made this for a 30mm diameter eye stalk with a mm to spare.
This was intended as a one-off for my own Genesis Dalek but feel free to tinker.
68 downloads
0 comments
Submitted
-
NSD Shoudlers STL
By daviddz
This is just the Shoulder section of the Solid works NSD 1.0.0 by cjorgensenmd
I took the fiberglass NSD shoulder.SLDPRT file, and used Grab CAD to convert it to an STL file since I don't have Solidworks.
I then used Mesh Mixer to cut it in to quarters that would fit on my CR-10 Max printer.
NOTE: I have not tried printing this (Yet), though all files are water tight, and Should print OK.
309 downloads
0 comments
Updated
-
NSD eye pivot holder
By cjorgensenmd
Designed to hold my 3d printed NSD eye pivot and support the interior dome. The base is as thick as it is because I needed the extra height to get the eyestalk where it needed to be from my rotating base. The little horizontal rod on the lower side of this piece is itended to be used to attach a spring to counterbalance the weight of the whole eye.
549 downloads
-
Davros-Shoulder Clamp Slide Cap.stl
By jaguwa68
Top cap for 40x20mm box section for the shoulder epaulette sliders
13 downloads
0 comments
Submitted
-
Davros-Shoulder Clamp Boss LH.stl
By jaguwa68
Left hand boss that take 2x 40x20mm box section sliders and mates with the shoulder clamp former.
13 downloads
0 comments
Submitted
-
Davros-Shoulder Clamp Former.stl
By jaguwa68
Former that mates to the shoulder boss (handed part). Has rebates to take foam edge inserts which can be wrapped in leather, and a top insert to be cut from separate sheet (metal or plastic)
17 downloads
0 comments
Submitted
-
Davros-Console Spirit Level Case Upper.stl
By jaguwa68
Davros Console - Spirit level bezel (Bleach version)
12 downloads
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
Davros-Hand Bar, RH.stl
By jaguwa68
Right side of the hand bar on the Bleach Davros console. Intended to be used with a 16mm diameter steel tube core.
11 downloads
0 comments
Submitted
-
Davros-Hand Bar Bezel.stl
By jaguwa68
For connection of the hand bar to the console. Intended to be used with a 16mm diameter steel tube core.
9 downloads
0 comments
Submitted
-
Davros-Hand Bar, LH.stl
By jaguwa68
Left side of the hand bar on the Bleach Davros console. Intended to be used with a 16mm diameter steel tube core.
10 downloads
0 comments
Submitted
-
Mk 1-3 Trefoil Dowel
By WhosWho
Here's a 3D printable version of the classic trefoil dowel design. Great for those looking for something more accurate than 3 dowels glued together. Includes pin and hole for alignment. Cut into three parts, so the seams can be hidden behind the neck rings.
35 downloads
0 comments
Submitted
-
SWD Dalek Neck Bin
By Chris Moliere
This was created using the dimensions listed in the new plans, as well as some approximations for the handles. This model will remain unsliced so that people can scale it for their own printers. I filled in the top to allow people to mold the bin in fiberglass or silicone (for slush casting/rotocasting.) I will update this model once new dimensions are found, or if there are inaccuracies. Enjoy!
39 downloads
0 comments
Updated
-
Davros-Vent, Ring Upper.stl
By jaguwa68
Vent Upper Ring
Davros-Plate, LH.stl Davros-Vent, Ring Upper.stl Davros-Vent, Ring.stl Davros-Vent, Centre.stl
9 downloads
0 comments
Submitted
-
Davros-Vent, Ring.stl
By jaguwa68
Vent Assy Lower Ring
Davros-Plate, LH.stl Davros-Vent, Ring Upper.stl Davros-Vent, Ring.stl Davros-Vent, Centre.stl
6 downloads
0 comments
Submitted
-
Top Downloads
Week
-
Free
-
Free
-
Free
-
Free
-
Free
Month
-
Free
-
Free
-
Free
-
Free
-
Free
Year
-
Free
-
Free
-
Free
-
Free
-
Free
All Time
-
Free
-
Free
-
Free
-
Free
-
Free
-
-
Recent File Reviews
-
Michael56 4
I'm in my late 60's. I live in Australia and have always enjoyed Doctor Who from the very first episode aired here around 1965 when I was 9 years old. Thought how amazing it would be to have a Dalek but had no idea how or where to even begin UNTIL I came across this site. Thanks for giving me the opportunity to at least be able to start on a Dalek build and will detail my progress as it goes along.
-
Mark Sheriff 6
Excellent , looks great and very well designed , well thought out . thank you
-
Marc Harris 73
I'm in my 50s and have since I was a boy watching Dr Who in the 70s always dreamed of making a Dalek for fun, now I have the time and resources, along with your forum's help it's time to live that dream.
I have watched some of the members videos, and I am very impressed with what I have seen.
Long live the Who verse.
I will document my progress and share any innovations I make
-
Chris R 25
Great set of models that printed and fitted together really easily. Can't comment on accuracy as I'm no expert but very happy with the result
-
Dalek Hal 312
Great file, easy to print
-
doctorone 3
Great plan but the pivot does not print as it is not complete like the eye stalk
-