-
Registration
Please register an account to access the Forum topics and features.
An Active Membership subscription gives you access to extra features and exclusive content!
Choosing Active Membership is a great way of supporting the community and showing your appreciation for our resources.
Please note that you need to register BEFORE you can use Facebook, Twitter or Google as a sign in method.
Files For 3D Printing
Files that can be used to for 3D printing physical versions, using your own printer or a service such as Shapeways etc.
Note that files for CNC and laser cutting can be found in their own sub-section, inside.
248 files
-
Classic Dalek Gun Collar
By Aaron J Climas
I've made so many of these little things over the years, lining up the holes, drilling them straight. Cutting the pipe into thin slices.
Hopefully this saves other people fluffing around with drills and pipe cutters.
Edit- I've printed this and it fits *perfectly* on 1" tube. It could possibly be 0.5mm smaller all around, but that will vary on a print by print basis, I guess.
25 downloads
0 comments
Updated
-
Classic Dalek Pivot
By Ferrain
If printing the Genesis 5.5" Tapered Eye Stalk - The pivot should not be printed first in the event that the pivot insert shears & can't be refitted.
Print with a raft to allow ease of joining the halves.
PivotJan8FFV4.stl - Flat faced (no insert for eye stalk) with threaded bar channel - Choose this one if you have a eye stalk that will not fit into the 1" insert (or if the insert has sheared during the printing).
PivotJan8INSV4.stl - Insert 1" diameter 1.1cm depth hole to accommodate straight or tapered eye stalks.
Print the guide 4mm diameter pin for ease of assembling the two halves if required.
Print time on standard profile MB Replicator 2 should take about 2.5 - 3 hours & use 2.5 39g (0.09IIb) on standard quality print settings for each half.
114 downloads
0 comments
Updated
-
Classic Dalek shoulders for 3d printing.
By captianboko
This for classic daleks and there is 2 version with and without chest bumps on the front of the shoulders.
(anyone can and should modify these if they so choose to)
18 downloads
0 comments
Submitted
-
Classic Eyeball
By Aaron J Climas
This is the front half of a classic style eyeball from the 60's. It's a slightly odd size hemisphere, and the 12 degree angle on the lip can be hard to get even.
So I have made a 3D print file, presented in both STL and OBJ format for people to print if they aren't so keen on making on themselves.
I haven't printed this item yet, but plan to later today. Although checking over the file there should be no major issues. It should fit perfectly flush with a 4" (102mm) hemisphere. It has 360 isoparms coming out across the body, so shouldn't suffer from not having enough resolution on the body.
Edit- I printed the file today, and it came out without a hitch. Although the model was 90 degrees out! Please give me a shout if you print this.
77 downloads
-
Classic eyeball and pivot
By Huxster2000
The 3D models I used to print the eyestalk for my Power of the Daleks build. The parts here are designed to accept an inner tube 25mm in diameter and outer tube sections 32mm in diameter. The hole through the side of the eye pivot is sized for an m8 threaded bar.
351 downloads
-
Colonel Barkers NSD Eye front.
By Aaron J Climas
This model was made in Maya and converted to STL.
It has been printed once on an 'Up' printer, and took 3hour 20min in total. Feel free to share images of your own prints of this model.
Cheers,
Aaron
50 downloads
0 comments
Submitted
-
comet_dalek.zip
By tobor2288
The dome on the comet kit is not very accurate. Here are replacment domes, as well as mid sections and appendages.
There are TV and Movie domes. One of the mid sections is designed for slats, the other without. There are appendages for the movie daleks only.
These files are not really designed for home FDM printers. If you have a SLA resin printer, they should work.
I got the parts printed by Shapeways and I.Materialise in various materials.
Note: The comet daleks are not 8th scale as stated on the box. They are about 92% of 8th scale.
These files also work for the Product Enterprise Infra red movie daleks, which are the same scale. There are two of them in the attached pictures.
91 downloads
0 comments
Updated
-
Complete NSD Scale Model
By audrey2
All the parts for a scale NSD that can be printed and assembled.
The parts are designed to go together at a 1/5 scale, and while it may work in other scales I haven't tried them yet, so that's up to you to play around with.
You can see how I printed mine and put mine together when printed on a Replicator 2 here.
291 downloads
-
Custom Emperor Design Figure
By Jack Grace
Hi folks!
My pal taught me how to use 3d print software and I basically went into a fugue state and made this in a couple of hours.
I quite like his look of him, but it's obvious I'm a beginner by how I used repeated basic functions to create complex shapes somewhat inefficiently.
My pal is gonna let me upload her files on here too, and I'll clearly label them as such, but you can probably tell ours apart because my code is always about twice as long as it could be.
My emperor is designed to scale with 5" figures and combines the general shape of a TV21/comic emperor with the looming size of an Evil Emperor.
11 downloads
-
Customised 3D pieces for NSD from KiwiDoc's scrapmetaltron
By kiwidoc
(Oil Seal replica) Base for 100mm Acrylic hemis - press fit
Neck blocks with a better placement of the ball and angled back slot
Allan head bolt cap for fenders
40 downloads
0 comments
Submitted
-
Dalek Assault Claw
By simon83079
Replica of the assault claw from Parting of the ways. Already separated into printable parts.
14 downloads
0 comments
Submitted
-
Dalek Cannon
By simon83079
The dalek cannon from parting of the ways. Made to fit onto a 38mm tube, plastic, metal, what ever floats yer boat. Fits together well enough. Then comes the fun job of sanding down!
10 downloads
0 comments
Updated
-
Dalek Destiny Bomb
By Luke S
I just finished making my other 3d print of the Dalek Destiny Bomb. I notice people were looking what the bombs were, but could not find what it was, So i decide to make this. The Yellow band Is Not in the File! You should use yellow paper like the prop did!
If you find that its measurements should be changed then tell me and I will update them.
IF You have Downloaded any of my Prints please Pm if I have added or edited it, so i can send you the newest copy.
Unauthorized sales and distribution, in any format, is strictly prohibited.
Print Settings
Printer brand:
Creality
Supports:
Yes
Resolution:
0.1mm
Printer:
Ender 3
Infill:
100%
Filament_brand:
Filament_color:
red
Filament_material:
PLA
39 downloads
-
Dalek Eyestalk Discs
By cdngoose
Here is a simple file, I have found a baby Blue PLA filament that is quite close in colour and these simple files can be adjusted to suit the size you need for your own Dalek. They can also be painted if you don't have access to the light blue filament..
303 downloads
-
Dalek Gatling Gun
By RattyVulcan
These files allow you to build a version of the Gatling Gun which includes integrated pistol grip and a housing for a motor and electronics to replicate the lights and spinning effect of a 'real' gatling gun as it slows due to friction.
More details can be found here:
313 downloads
0 comments
Submitted
-
Dalek MK3 Slats
By Ferrain
Dalek MK3 Slats.
Suitable for 3D printing or on a CNC machine - Holes are 2mm in diameter.
Accurate as per the latest MK3 Plans - Caveat I always assumed the slats were metal like the collars, not acrylic consequently the thickness reflects the width of the collars\belts (Unless John & co can update me).
It looks as though these will be time intensive to 3D print (2.5 hours per large slat), if you are using a glass build plate (Like moi), a nice smooth glossy finish should be produced.
Update - Additional info & picture.
First Small Slat Printed (It lifted a bit on the build plate).
New Sailfish firmware installed away from stock Makerware gives additional information as to the amount of material (Height increased to 2.5mm with settings at 0.1mm layer height & 8% Infill) - 1 hour 21 mins build time, 6M of filament.
116 downloads
0 comments
Updated
-
Dalek Plunger Variety Pack
By Chris Moliere
This is a set of Dalek plungers created using the profiles in the plans. All are here, save the NSD plunger. I designed them to be printed in flex filament, so they might need some finishing. Use for whatever you like, but you can credit me if you want!
191 downloads
0 comments
Updated
-
Dalek Thompson Submachine Gun
By Peekaymac
I drew these up so that my spotter could easily be in costume as a recognizable character that wasn't restrictive or limited movement. Basically they just need to wear 1930's style clothing and carry the Thompson and it's done. Oddly I didn't 3D print my own version - it was made by hand but I subsequently made these files for others to use.
You'll need:
6x Barrel Tines
2x Magazine Side 1
I have each of the magazine faces mirrored on my model but I can't remember why now.
1x each of everything else
I allowed 1.75mm pin holes for joining all the parts together.
Any questions please ask.
983 downloads
-
DalekStorm-Parts2.zip
By Djsloanau
Attached is the zip of all STL parts to date as well as a couple of the Lightwave 2015 object files for Djsloanau's 1/6 Scale 3D Printed Dalek Storm. It has been 3 years since I started the project and I don't know if or when I'll get back to it. If you can use this to complete a Storm I'd love to see your photos.
93 downloads
-
0 comments
Submitted
-
Davros-Console Spirit Level Case Upper.stl
By jaguwa68
Davros Console - Spirit level bezel (Bleach version)
12 downloads
0 comments
Submitted
-
0 comments
Submitted
-
Davros-Hand Bar Bezel.stl
By jaguwa68
For connection of the hand bar to the console. Intended to be used with a 16mm diameter steel tube core.
9 downloads
0 comments
Submitted
-
Davros-Hand Bar, LH.stl
By jaguwa68
Left side of the hand bar on the Bleach Davros console. Intended to be used with a 16mm diameter steel tube core.
10 downloads
0 comments
Submitted
-
Davros-Hand Bar, RH.stl
By jaguwa68
Right side of the hand bar on the Bleach Davros console. Intended to be used with a 16mm diameter steel tube core.
11 downloads
0 comments
Submitted
-
Top Downloads
Week
-
Free
-
Free
-
Free
-
Free
-
Free
Month
-
Free
-
Free
-
Free
-
Free
-
Free
Year
-
Free
-
Free
-
Free
-
Free
-
Free
All Time
-
Free
-
Free
-
Free
-
Free
-
Free
-
-
Recent File Reviews
-
Michael56 4
I'm in my late 60's. I live in Australia and have always enjoyed Doctor Who from the very first episode aired here around 1965 when I was 9 years old. Thought how amazing it would be to have a Dalek but had no idea how or where to even begin UNTIL I came across this site. Thanks for giving me the opportunity to at least be able to start on a Dalek build and will detail my progress as it goes along.
-
Mark Sheriff 6
Excellent , looks great and very well designed , well thought out . thank you
-
Marc Harris 73
I'm in my 50s and have since I was a boy watching Dr Who in the 70s always dreamed of making a Dalek for fun, now I have the time and resources, along with your forum's help it's time to live that dream.
I have watched some of the members videos, and I am very impressed with what I have seen.
Long live the Who verse.
I will document my progress and share any innovations I make
-
Chris R 25
Great set of models that printed and fitted together really easily. Can't comment on accuracy as I'm no expert but very happy with the result
-
Dalek Hal 312
Great file, easy to print
-
doctorone 3
Great plan but the pivot does not print as it is not complete like the eye stalk
-