-
Registration
Please register an account to access the Forum topics and features.
An Active Membership subscription gives you access to extra features and exclusive content!
Choosing Active Membership is a great way of supporting the community and showing your appreciation for our resources.
Please note that you need to register BEFORE you can use Facebook, Twitter or Google as a sign in method.
Files For 3D Printing
Files that can be used to for 3D printing physical versions, using your own printer or a service such as Shapeways etc.
Note that files for CNC and laser cutting can be found in their own sub-section, inside.
248 files
-
Imperial Emperor/Davros Parts
By Chris Moliere
These are the parts for the Imperial Emperor from Remembrance of the Daleks, all in full scale. Please note that I didn't include the skirt, as that is a lot easier to construct from wood or fiberglass. I also didn't slice this set, so people could cut the file to their preferences. I would recommend printing the eye in flexible filament, since I use the straight measurements for its model; the outside is higher than the inside to help make painting it easier. Also, the dome thicknesses vary from 6-8 mm, so if you want it any different thicknesses, feel free to contact me. Please enjoy!
66 downloads
-
Invasion Earth: 2150 A.D Eyestalk Pivot
By cdngoose
This file is the Eyestalk Pivot without a flat spot as seen on Invasion Earth Dalek . Phil has kindly donated his time to help out with drawing this part with new features,
NOTE* picture presently shows flat spot that has been eliminated.
Eye pivot
1" hole for eyestalk shaft
Smaller centered 3/8ths hole for threaded bar
Slot for threaded bar nut.
Hole through the backside to the slot for wiring.
3/8ths hole centered for pivot
29 downloads
0 comments
Updated
-
Louis Marx Bump and Go Toy Dalek
By erichdalek
This is a model of the Louis Marx Bump and Go Toy Dalek of the 60's, as used in the production of Evil of the Daleks per information from this gallery entry and this BBC photo.
Provided is:
-.SLDPRT of the whole thing, for your personal improvements or modifications
-.STL of the whole thing
-.STL's of it with the eyestalk and appendages in separate files for you to glue on
Let me know any ways I could better the screen-accuracy or proportions.
307 downloads
-
Lower Neck Ring for 2008 NSS
By Orion79
The lower neck ring assembly for the 2008 Supreme Dalek. Added alignment features to make assembly easier.
3 downloads
0 comments
Updated
-
M8 Wheel
By Dr How
Small hand wheel to make a M6 bolt turnable by hand rather than having to use a spanner. Attach to the hex bolt head. Ideal for fixing together dalek sections which need to be regularly disassembled.
37 downloads
0 comments
Submitted
-
Magic 8 Ball Inner Sleeve
By redman99
This will slide into a magic 8 ball and sit against the inner ring, and the outer hole.
Should keep it nice and sturdy, and allow your alu tube to slide right though.
73 downloads
-
Mark 3 Dome stl files for lazy susan bearing ring
By Adam Gready
This is my attempt at a Mark 3 dome with a shelf designed in for a lazy susan bearing ring. I have 3d printed and assembled this but i haven't actually assembled the dome using the bearing ring so I can't guarantee it is exactly what you are looking for. The files include the complete dome, the dome cut into quarters with the lower brim separated into 1/8ths. Also included is a gluing jig for aligning the brim pieces which seemed to work quite well. The dome quarters wont fit on a 200x200 bed sorry. I have struggled to slice it up finer as Tinkercad was struggling with my request. It can be cut easily enough using meshmixer and if you slice the top of the dome off you can get 1/8th size pieces smaller enough to fit on a smaller bed. Please note all files are at 1/10th scale so make sure you increase by 1000% in your slicer!
101 downloads
0 comments
Submitted
-
Marx_BumpNGo_parts
By LabRat
STL for replacement plunger, gun, and eye-stalk, for the 6.5" (1974) Bump and Go toy. Used online images for reference and scale, as I had no access to originals to measure. Photo shows first print attempt (with some sagging, as I didn't have enough supports in place). Also included are versions of the laser and eye-stalk with a hole ready to accept 3mm acrylic rod (in case you want to add additional "blinky/flashy" effects.
Post pics if you print these for you Dalek.
17 downloads
0 comments
Submitted
-
Mk 1-2-3 EyeBall
By Luke S
Come With multiple Different iris/lids! You Can Mix and Match!
You Can Modify them If You Like.
Includes:
Mk1 Eyelid
Coming Soon!
POWTD eye front and Iris MK3 Shorten Toffee lid MK2 Barnardo Eyeballs Mk3 Evil of Daleks Pupil Iris. Mk2 EyeLids(Different Hole Diameters) Mk1-2-3 Eye Back Mk1-2 Eye Front Mk2 Toffee Apple Front & EyeLid
593 downloads
-
Mk 1-3 Trefoil Dowel
By WhosWho
Here's a 3D printable version of the classic trefoil dowel design. Great for those looking for something more accurate than 3 dowels glued together. Includes pin and hole for alignment. Cut into three parts, so the seams can be hidden behind the neck rings.
35 downloads
0 comments
Submitted
-
Mk 3 Dalek Eyestalk - for my uploaded eye STL's.
By ansonjames
Eyestalk for my uploaded eye STL's.
Print Eye stalk bottom and eye pivot in the orientation it's presented in WITH supports, at least 20% infill and three perimeters is good.
No supports required for eye stalk top, it's been tested with the properly sized transparent acrylic tube which fits perfectly and has no play.
No glue required, just an M10 thread bar with two nuts for top and bottom.
Fire me a PM if you have an questions!
118 downloads
0 comments
Updated
-
MK1 Dalek Hemis
By Luke S
I Just made this for people who want a rim around there hemis to fit in the skirt perfect. Its Hollow in the Inside to save some of your print. IF you Don't have a Printer In America You can use this site to print it https://www.sculpteo.com/en/upload/
49 downloads
0 comments
Updated
-
mk1 and 2 dome lights
By Sparky_Butane
Included are a solid and shelled files. They are as accurate as I could make them so please message me with any comments or questions.
Thanks and Enjoy
108 downloads
0 comments
Submitted
-
0 comments
Updated
-
Mk1 Gun Rods
By Luke S
So here my version of a mk1 gun rod, kinda like a clear acrylic one. You can print it colored or clear filler. The Rings, Rods, Octagons are separate pieces, so you can put it together easily and with the octagons not with it and giving you a hard time trying to paint it. The Gun Cylinder has pre cut holes for the rods to fit in.
Print Settings
Printer brand:
Creality
Supports:
Yes
Resolution:
0.1mm
Printer:
Ender 3
Infill:
100%
Filament_brand:
Filament_color:
white, Black, gray
Filament_material:
PLA
180 downloads
0 comments
Updated
-
MK1/2/3 & Movie 1/2 Stalk/Pivot Set!
By Luke S
So you have a budget , or don't know how to taper wood.
A 18mm hole has been added so that you can use them, if you just used the eyestalk without a 18mm rod it would break from the weight.
So I used the Mk1 Dalek Blueprints to Make these models.
IF You have Downloaded any of my Prints please Pm if I have added or edited it, so i can send you the newest copy.
Print Settings
Printer brand:
Creality
Printer:
Ender 3
Infill:
100%
Filament_brand:
Filament_color:
white, Black, Gray
Filament_material:
PLA
194 downloads
0 comments
Updated
-
MK1/2/3 Movie1/2 EyeDisc & Tube Set
By Luke S
I used the Plans to make these. It Fits with my Dalek eyestalk set. You may want to use clear filling for the tube. You may want to break it apart if you have a small printer.
159 downloads
0 comments
Updated
-
mk3 or "Egg Cup" lights
By Sparky_Butane
Here are the files for 3D printing the mk3 dome lights. If you have any questions or comments please message me.
Thanks and Enjoy
102 downloads
0 comments
Submitted
-
Moflash Lens
By WhosWho
A hi res STL based on the Moflash lenses used New Paradigm and New Series Daleks.
135 downloads
-
Moflash Lens STL (NSD dome lights)
By ddoherty958
This is my Moflash lens for the NSD dome lights. It's just the lens, no cage. It's as accurate as I can make it, of course feedback is welcome.
If you want to try printing it in clear filament here's the file! I found it extremely hard, having problems with bed adhesion in particular.
176 downloads
-
Movie Beaker (Updated)
By WhosWho
Here's my model of a Movie Dalek Beaker. I hope this helps any who don't have an original to take molds from.
196 downloads
-
Movie Dalek Claw
By Aaron J Climas
Here's a quick STL of half the claw that should be 1:1 scale, with an 8mm hole at one end.
44 downloads
0 comments
Submitted
-
Movie Dalek Dome
By Chris Moliere
Another dome! This is the Movie Dalek dome, using the measurements given in the updated plans. This can be used for a fiberglass mould, or just used as is. As always, enjoy!
97 downloads
0 comments
Updated
-
Movie Dalek Domelight Beaker 3D Scan
By audrey2
This is a 3D scan I took off an original beaker from the 60s. The file was then cleaned up, and an interior shape was cut to reasonably match the original.
Can be used to 3D print or carve.
174 downloads
0 comments
Updated
-
Movie Dalek.zip
By iansarian
Hi
Here is my version of the Movie Dalek Dome, Neck, Eye, Gun and Claw Arm stls based on the forum plans.
The files are designed to be printed on a small printer with a print bed 220x220.
Regards
Ian
33 downloads
0 comments
Updated
-
Top Downloads
Week
-
Free
-
Free
-
Free
-
Free
-
Free
Month
-
Free
-
Free
-
Free
-
Free
-
Free
Year
-
Free
-
Free
-
Free
-
Free
-
Free
All Time
-
Free
-
Free
-
Free
-
Free
-
Free
-
-
Recent File Reviews
-
Michael56 4
I'm in my late 60's. I live in Australia and have always enjoyed Doctor Who from the very first episode aired here around 1965 when I was 9 years old. Thought how amazing it would be to have a Dalek but had no idea how or where to even begin UNTIL I came across this site. Thanks for giving me the opportunity to at least be able to start on a Dalek build and will detail my progress as it goes along.
-
Mark Sheriff 6
Excellent , looks great and very well designed , well thought out . thank you
-
Marc Harris 73
I'm in my 50s and have since I was a boy watching Dr Who in the 70s always dreamed of making a Dalek for fun, now I have the time and resources, along with your forum's help it's time to live that dream.
I have watched some of the members videos, and I am very impressed with what I have seen.
Long live the Who verse.
I will document my progress and share any innovations I make
-
Chris R 25
Great set of models that printed and fitted together really easily. Can't comment on accuracy as I'm no expert but very happy with the result
-
Dalek Hal 312
Great file, easy to print
-
doctorone 3
Great plan but the pivot does not print as it is not complete like the eye stalk
-