-
Registration
Please register an account to access the Forum topics and features.
An Active Membership subscription gives you access to extra features and exclusive content!
Choosing Active Membership is a great way of supporting the community and showing your appreciation for our resources.
Please note that you need to register BEFORE you can use Facebook, Twitter or Google as a sign in method.
Files For 3D Printing
Files that can be used to for 3D printing physical versions, using your own printer or a service such as Shapeways etc.
Note that files for CNC and laser cutting can be found in their own sub-section, inside.
248 files
-
Movie Dalek Dome
By Chris Moliere
Another dome! This is the Movie Dalek dome, using the measurements given in the updated plans. This can be used for a fiberglass mould, or just used as is. As always, enjoy!
97 downloads
0 comments
Updated
-
Full Size Movie Dalek Fender (1st or 2nd Films)
By Chris Moliere
FINALLY! This thing took an eternity to split into smaller parts, but it's complete! This can be used for both movies: If you are making a 1st movie Dalek, print all 60 parts, but if you're making a 2nd movie Dalek, print ONLY parts 1-35, and use rubber sheeting for the rest of the fender. This thing will probably take several months or more to print, but it will be worth it! Have fun!
768 downloads
0 comments
Updated
-
NDP Plunger
By MechDesign
I think this is very close to the design shown in the plans. Let me know if there is something obviously wrong.
55 downloads
0 comments
Submitted
-
NSD Supreme Parts
By Chris Moliere
This is a set of 3d printable parts for the NSD Supreme, using a combination of photos of the original prop from episodes and events, @acrylikhan and @bec weir's build diaries, and some of the dimensions listed in the plans. It was very difficult, given that the plans only give a rough approximation of the measurements. The parts here are the the bases for the front and side clamps, the clamps themselves, the neck furniture, and the light plinths. Enjoy!
195 downloads
0 comments
Updated
-
1/10th scale Dalek Hemisphere
By Pugsy
dalek bump.STL, modelled for a 1/10th scale dalek but can be scaled up if needed, hopefully will be of use to somebody
25 downloads
0 comments
Updated
-
1/10th scale Dalek dome
By Pugsy
dalekdome.STL, modelled for a 1/10th scale dalek but can be scaled up if needed, hopefully will be of use to somebody
29 downloads
0 comments
Updated
-
Heronrib Panels
By WhosWho
3D printable panels based on Heronrib matting for use in NSD neck bins. Includes two different versions with different gap alignments.
148 downloads
0 comments
Submitted
-
3d Printable Shawcraft Skirt
By Chris Moliere
I scaled this model for my Prusa Mini, in order to print all the parts for it. I designed this to use for making a fiberglass mold, but with some modification, it might be able to be actually be used on a prop. However, if you decide to do so, you would most likely need to print the parts with 100% infill for push-through hemis. Enjoy!
493 downloads
0 comments
Submitted
-
TDP Dome - Whole STL, Plus Meshmixer Cut STL Files
By TimW
I drafted a TDP dome based on the plans from the forum using Fusion 360, diameter 500mm, height 190mm, arc radius 260mm. I used the revolve function from a sketch to get the dome shape then punched a hole in it where the eye is to go. I split up the dome STL into about 17 pieces (the number varied with on various attempts) using Meshmixer (top tip use plane cut with Cut Type - slice and Fill Type - remeshed fill.
66 downloads
0 comments
Submitted
-
SWD Gun Parts
By bryanxiii
.STL files for a Special Weapons Dalek based on some blue prints I found on this site, you will also have to slice the file for your printer,
These were made using tinkercad, please also note that the centre whole on the barrel is set to 50mm or around 1 1/2", the plan calls for a central pipe of 1 3/4", I however was unable to source an pipe in that size so I sized down.
65 downloads
0 comments
Updated
-
NSD Eye EMA Parts
By Chris Moliere
These are 3d models of the individual pieces of the NSD's eyeball. They were created using the CAD files in our downloads sections. Do to the small size of some the parts, I would recommend SLA or other forms of resin 3d printing. I also made a version of the VT-400 with the MRH-160Ps attached, in case the parts are too small to print individually. Enjoy!
55 downloads
0 comments
Submitted
-
Movie Dalek Claw
By Aaron J Climas
Here's a quick STL of half the claw that should be 1:1 scale, with an 8mm hole at one end.
44 downloads
0 comments
Submitted
-
NSD EyeStalk Disks
By Luke S
Here's my way of giving back to Project Dalek. There are 3 disk in the Set, each different sizes. Each are scaled from the Plans. This is my First 3d Printed Model, If this goes well i might make some more 3d prints. When I made these there is a flat bottom to them so, you may want to cast them in fiberglass molds or something. to make them hollow/curved in the inside. I wish you the best of luck of building your Dalek!
211 downloads
0 comments
Updated
-
MK1 Dalek Hemis
By Luke S
I Just made this for people who want a rim around there hemis to fit in the skirt perfect. Its Hollow in the Inside to save some of your print. IF you Don't have a Printer In America You can use this site to print it https://www.sculpteo.com/en/upload/
49 downloads
0 comments
Updated
-
MK1/2/3 & Movie 1/2 Stalk/Pivot Set!
By Luke S
So you have a budget , or don't know how to taper wood.
A 18mm hole has been added so that you can use them, if you just used the eyestalk without a 18mm rod it would break from the weight.
So I used the Mk1 Dalek Blueprints to Make these models.
IF You have Downloaded any of my Prints please Pm if I have added or edited it, so i can send you the newest copy.
Print Settings
Printer brand:
Creality
Printer:
Ender 3
Infill:
100%
Filament_brand:
Filament_color:
white, Black, Gray
Filament_material:
PLA
194 downloads
0 comments
Updated
-
Classic Dalek Appendage Flame thrower
By Luke S
Here is My Second Classic Appendage Model. This is the Flame Thrower seen from Daleks Master Plan. There nothing really other to say is to spray paint the inside black and the other side gray? Like How @moviedalek did his. the way to attach this to your is by glue it or adding a wooden circle behind it then screw it in.
Unauthorized sales and distribution, in any format, is strictly prohibited.
21 downloads
0 comments
Updated
-
Classic Dalek Appendage Electrode Unit
By Luke S
A Zip File of the whole items is in the download to save up download room.
I Made the Electrode Unit from The Chase. Noting really about this model but that you will need to make the coil around the prongs and they are blue just to let you know and that this may need to be split into parts. if anyone want to link the split up one in the comments go ahead. You may just want to build this when 3d printing is stronger. This in my opinion is the worst looking appendages I have made
IF You have Downloaded any of my Prints please Pm if I have added or edited it, so i can send you the newest copy.
Unauthorized sales and distribution, in any format, is strictly prohibited.
Print Settings
Printer brand:
Creality
Printer:
Ender 3
Infill:
100%
Filament_brand:
Filament_color:
white, Black
Filament_material:
PLA
44 downloads
0 comments
Updated
-
Classic Dalek Appendages Cutting Torch Kit
By Luke S
A Zip File of the whole items is in the download to save up download room.
The 10mm tube is 350mm long.
I Made the Cutting Torch From the First Dalek Story when they cut the door down. This come with everything besides the 10mm tube and bendy tube. The Tube in the Screen Shots are just to show you what it looks like. Also The Colors in the screenshot are what you could spray paint it, besides the yellow tube, spray that black.
IF You have Downloaded any of my Prints please Pm if I have added or edited it, so i can send you the newest copy.
Unauthorized sales and distribution, in any format, is strictly prohibited.
Print Settings
Printer brand:
Creality
Supports:
Yes
Resolution:
0.1mm
Printer:
Ender 3
Infill:
100%
Filament_brand:
Filament_color:
white, Black
Filament_material:
PLA
63 downloads
0 comments
Updated
-
Mk1 Gun Rods
By Luke S
So here my version of a mk1 gun rod, kinda like a clear acrylic one. You can print it colored or clear filler. The Rings, Rods, Octagons are separate pieces, so you can put it together easily and with the octagons not with it and giving you a hard time trying to paint it. The Gun Cylinder has pre cut holes for the rods to fit in.
Print Settings
Printer brand:
Creality
Supports:
Yes
Resolution:
0.1mm
Printer:
Ender 3
Infill:
100%
Filament_brand:
Filament_color:
white, Black, gray
Filament_material:
PLA
180 downloads
0 comments
Updated
-
MK1/2/3 Movie1/2 EyeDisc & Tube Set
By Luke S
I used the Plans to make these. It Fits with my Dalek eyestalk set. You may want to use clear filling for the tube. You may want to break it apart if you have a small printer.
159 downloads
0 comments
Updated
-
NSD 2005 Big slat template
By ramsesvp
A template I am using for creating the right distance for the slats of my NSD Dalek
41 downloads
0 comments
Updated
-
0 comments
Updated
-
comet_dalek.zip
By tobor2288
The dome on the comet kit is not very accurate. Here are replacment domes, as well as mid sections and appendages.
There are TV and Movie domes. One of the mid sections is designed for slats, the other without. There are appendages for the movie daleks only.
These files are not really designed for home FDM printers. If you have a SLA resin printer, they should work.
I got the parts printed by Shapeways and I.Materialise in various materials.
Note: The comet daleks are not 8th scale as stated on the box. They are about 92% of 8th scale.
These files also work for the Product Enterprise Infra red movie daleks, which are the same scale. There are two of them in the attached pictures.
91 downloads
0 comments
Updated
-
Movie Dalek Domelight Beaker 3D Scan
By audrey2
This is a 3D scan I took off an original beaker from the 60s. The file was then cleaned up, and an interior shape was cut to reasonably match the original.
Can be used to 3D print or carve.
173 downloads
0 comments
Updated
-
Neck ring tri-foil holder
By MechDesign
This item allows the builder to drill a straight 3/4 inch hole in the neck rings instead of trying to drill 3 small 1/4 inch holes right next to each other at an angle. The angle of the holes puts the tri-foils at the same angle as the neck rings in the Shawcraft Movie Dalek Plans.
49 downloads
0 comments
Updated
-
Top Downloads
Week
-
Free
-
Free
-
Free
-
Free
-
Free
Month
-
Free
-
Free
-
Free
-
Free
-
Free
Year
-
Free
-
Free
-
Free
-
Free
-
Free
All Time
-
Free
-
Free
-
Free
-
Free
-
Free
-
-
Recent File Reviews
-
Michael56 4
I'm in my late 60's. I live in Australia and have always enjoyed Doctor Who from the very first episode aired here around 1965 when I was 9 years old. Thought how amazing it would be to have a Dalek but had no idea how or where to even begin UNTIL I came across this site. Thanks for giving me the opportunity to at least be able to start on a Dalek build and will detail my progress as it goes along.
-
Mark Sheriff 6
Excellent , looks great and very well designed , well thought out . thank you
-
Marc Harris 64
I'm in my 50s and have since I was a boy watching Dr Who in the 70s always dreamed of making a Dalek for fun, now I have the time and resources, along with your forum's help it's time to live that dream.
I have watched some of the members videos, and I am very impressed with what I have seen.
Long live the Who verse.
I will document my progress and share any innovations I make
-
Chris R 25
Great set of models that printed and fitted together really easily. Can't comment on accuracy as I'm no expert but very happy with the result
-
Dalek Hal 312
Great file, easy to print
-
doctorone 3
Great plan but the pivot does not print as it is not complete like the eye stalk
-