-
Registration
Please register an account to access the Forum topics and features.
An Active Membership subscription gives you access to extra features and exclusive content!
Choosing Active Membership is a great way of supporting the community and showing your appreciation for our resources.
Please note that you need to register BEFORE you can use Facebook, Twitter or Google as a sign in method.
Files For 3D Printing
Files that can be used to for 3D printing physical versions, using your own printer or a service such as Shapeways etc.
Note that files for CNC and laser cutting can be found in their own sub-section, inside.
248 files
-
Customised 3D pieces for NSD from KiwiDoc's scrapmetaltron
By kiwidoc
(Oil Seal replica) Base for 100mm Acrylic hemis - press fit
Neck blocks with a better placement of the ball and angled back slot
Allan head bolt cap for fenders
40 downloads
0 comments
Submitted
-
Custom Emperor Design Figure
By Jack Grace
Hi folks!
My pal taught me how to use 3d print software and I basically went into a fugue state and made this in a couple of hours.
I quite like his look of him, but it's obvious I'm a beginner by how I used repeated basic functions to create complex shapes somewhat inefficiently.
My pal is gonna let me upload her files on here too, and I'll clearly label them as such, but you can probably tell ours apart because my code is always about twice as long as it could be.
My emperor is designed to scale with 5" figures and combines the general shape of a TV21/comic emperor with the looming size of an Evil Emperor.
11 downloads
-
Classic Dalek Gun Collar
By Aaron J Climas
I've made so many of these little things over the years, lining up the holes, drilling them straight. Cutting the pipe into thin slices.
Hopefully this saves other people fluffing around with drills and pipe cutters.
Edit- I've printed this and it fits *perfectly* on 1" tube. It could possibly be 0.5mm smaller all around, but that will vary on a print by print basis, I guess.
25 downloads
0 comments
Updated
-
3d Printed Plunger
By Jack Grace
A 3d Print file for a Plunger, may be a little angular but nothing an upscale and some sandpaper can't fix. Already has a hole in the bottom for any screws or axles or whatever your classic dalek has planned. The lip was crafted by yours truly to match the standard movie dalek, but can be used on any classic dalek.
I'm super excited because it is one of the first 3d design files I created on my own, but feel free to modify it however you want.
8 downloads
0 comments
Submitted
-
NSD Oils Seals With Skirt Mounts
By gazzer23
These take a long time to print and can be fiddly with all the screws. However, once printed out they are so easy to put on and take off.
Although I have made eight holes in the back plate, four screws are fine. They are extra in case of thread failure in the ring. You will need 4x3mm screws for each hemi plus 4xM2x6mm screws. They are for 100mm diameter hemispheres, either the clear plastic ones or the steel ones from China should be fine.
20 downloads
0 comments
Submitted
-
Drew' TDP 3D Model
By SketchTwitch
Hello everyone! I realized that there isn't a lot of files for the TDP build as it isn't as loved as the classic or 2005 Dalek models. Since I decided that I wanted to make the TDP as my first dalek build, I went ahead and modeled one of the plans from the forum. Attached is the zip file with all the parts individually, as well as a fully assembled model as STLs, at full size, though you can find the model on Onshape at: This link here incase you just want something specific.
I haven't printed anything myself yet besides the plunger at 50% just to test my supports, I will be printing a split version of the neck rings and the shoulder model for my build! If anyone has any questions or request let me know!
23 downloads
0 comments
Submitted
-
NSD dome rotation gears
By Nimitz
This gear and pinion is designed to fit a Lazy Susan which has a diameter for the inner ring of 415mm. This Lazy Susan is the perfect size to be used on an NSD dome. it may work for other domes but I've not tested it with anything but an NSD dome. You'll need to print 2 pieces of both the "A" & "B" parts. the ends have lap joints for stability and the countersunk holes are for 10-32 size bolts. the height of the gear has been designed so that you can leave the rubber feet that come with the lazy susan on the inner ring in place and the gear will be the same height. you will need to drill holes in the gear where your rubber feet are so it will sit flush with the bottom of your dome rotation plate.
Note: the picture shows the gear sitting on the top of the dome rotation plate but that was just to take the picture. the gear is mounted on the underside of the dome rotation plate which is why it is the same height as the rubber feet on the inner ring so it sits flush
73 downloads
0 comments
Updated
-
Movie Dalek.zip
By iansarian
Hi
Here is my version of the Movie Dalek Dome, Neck, Eye, Gun and Claw Arm stls based on the forum plans.
The files are designed to be printed on a small printer with a print bed 220x220.
Regards
Ian
33 downloads
0 comments
Updated
-
NSD Eye rear with the correct 12 Ribs - Correction of previous part on site
By Prefect1938
Hi, this is a correct part of Mr McGoo's Dalek eye which after printing I realised that the number of ribs was wrong. So I have changed it to 12 ribs with no other changes made.
31 downloads
0 comments
Submitted
-
NSD Mid Neck Ring Segment (For 200mm bed)
By jaguwa68
Mid neck ring segment that incorporates the strut knuckle. x8 required to complete the ring. I glued each segment together one after the other using superglue and clamps, then filled on both the underside and the joints using U-pol Fantastic two part body filler.
20 downloads
0 comments
Submitted
-
NSD Upper Neck Ring Segment (For 200mm bed)
By jaguwa68
Upper neck ring segment that incorporate the strut knuckle. x8 required to complete the ring. I glued each segment together one after the other using superglue and clamps, then filled on both the underside and the joints using U-pol Fantastic two part body filler.
27 downloads
0 comments
Submitted
-
Full Swd for 3d printing
By captianboko
This my take on the swd using a model i scale up and modified to make it possible for a human to fit inside of the model.
There is some problems with the model and this is a work in progress would also recommend to modify it to your hearts to content to make it better or interesting.
2 downloads
0 comments
Submitted
-
Eye moving device.
By captianboko
i made this for my dalek to make the eye movie but i wanted to give it to others so they can make there own version of it and improve on my work cause i'm not the best at this kind of modeling.
2 downloads
0 comments
Submitted
-
Movie_Dalek_Light_Lens.stl
By AlanB01
Movie_Dalek_Light_Lens.stl. Just been modeling the 60's movie dalek from the plans on here, great plans guys, so I thought I'd model the lights first so here is my take on the light lens, use as you will just give me a mention. Enjoy.
8 downloads
0 comments
Submitted
-
Movie_Dalek_Light_Lens_Base.stl
By AlanB01
Movie_Dalek_Light_Lens_Base.stl. This is the base for the light lens it's been dished to fit the Dome
4 downloads
0 comments
Submitted
-
NSD Heronrib Neck Mesh Segment-Lower
By jaguwa68
Lower neck mesh segment (to be used in conjunction with SKV-DKC-N106 Mesh Mid and SKV-DKC-N107 Mesh upper). Print time approx 10-12 hours. x8 required to complete each ring.
23 downloads
0 comments
Submitted
-
NSD Heronrib Neck Mesh Segment-Mid
By jaguwa68
Mid neck mesh segment (to be used in conjunction with SKV-DKC-N105 Mesh Lower and SKV-DKC-N107 Mesh upper). Print time approx 10-12 hours. x8 required to complete each ring.
21 downloads
0 comments
Submitted
-
NSD Heronrib Neck Mesh Segment-Upper
By jaguwa68
Upper neck mesh segment (to be used in conjunction with SKV-DKC-N105 Mesh Lower and SKV-DKC-N106 Mesh Mid). Print time approx 10-12 hours. x8 required to complete each ring.
17 downloads
-
SKV-DKC-SK138 Dalek-Receptacle, Quarter turn, Frt LH.stl
By jaguwa68
Design intended for quick release fixing of the fender to the skirt. To be used in conjunction with Pitking 44mm base 11mm grip quarter turn fasteners and spring retainers fitted to SKV-DKC-SK135 within the skirt lower panel. Please see SKV-DKA-F001 in link below for assembly details.
2 downloads
0 comments
Submitted
-
SKV-DKC-SK139 Dalek-Receptacle, Quarter turn, Frt RH.stl
By jaguwa68
Design intended for quick release fixing of the fender to the skirt. To be used in conjunction with Pitking 44mm base 11mm grip quarter turn fasteners and spring retainers fitted to SKV-DKC-SK136 within the skirt lower panel. Please see SKV-DKA-F001 in link below for assembly details.
2 downloads
0 comments
Submitted
-
SKV-DKC-SK140 Dalek-Receptacle, Quarter turn, RR.stl
By jaguwa68
Design intended for quick release fixing of the fender to the skirt. To be used in conjunction with Pitking 44mm base 11mm grip quarter turn fasteners and spring retainers fitted to SKV-DKC-SK137 within the skirt lower panel. Please see SKV-DKA-F001 in link below for assembly details. 2 off required.
2 downloads
0 comments
Submitted
-
SKV-DVC-B115 DAVROS-BOLSTER LH.stl
By jaguwa68
The left-hand headrest bolster (item 2 in drawing headrest assembly drawing SKV-DVA-B004). Best printed vertically to ensure clean visible surfaces.
1 download
0 comments
Submitted
-
SKV-DVC-B116 DAVROS-BOLSTER RH.stl
By jaguwa68
The right-hand headrest bolster (item 1 in drawing headrest assembly drawing SKV-DVA-B004). Best printed vertically to ensure clean visible surfaces.
1 download
0 comments
Submitted
-
SKV-DVC-B117 DAVROS-HEADREST TOP BAR.stl
By jaguwa68
The headrest top joining bar (item 3 in drawing headrest assembly drawing SKV-DVA-B004). Best printed horizontally to ensure clean visible surfaces.
1 download
0 comments
Submitted
-
SKV-DVC-B118 DAVROS-HEADREST STRUT.stl
By jaguwa68
The joining struts (item 4 in drawing headrest assembly drawing SKV-DVA-B004). 6 off required.
2 downloads
0 comments
Submitted
-
Top Downloads
Week
-
Free
-
Free
-
Free
-
Free
-
Free
Month
-
Free
-
Free
-
Free
-
Free
-
Free
Year
-
Free
-
Free
-
Free
-
Free
-
Free
All Time
-
Free
-
Free
-
Free
-
Free
-
Free
-
-
Recent File Reviews
-
Michael56 4
I'm in my late 60's. I live in Australia and have always enjoyed Doctor Who from the very first episode aired here around 1965 when I was 9 years old. Thought how amazing it would be to have a Dalek but had no idea how or where to even begin UNTIL I came across this site. Thanks for giving me the opportunity to at least be able to start on a Dalek build and will detail my progress as it goes along.
-
Mark Sheriff 6
Excellent , looks great and very well designed , well thought out . thank you
-
Marc Harris 63
I'm in my 50s and have since I was a boy watching Dr Who in the 70s always dreamed of making a Dalek for fun, now I have the time and resources, along with your forum's help it's time to live that dream.
I have watched some of the members videos, and I am very impressed with what I have seen.
Long live the Who verse.
I will document my progress and share any innovations I make
-
Chris R 25
Great set of models that printed and fitted together really easily. Can't comment on accuracy as I'm no expert but very happy with the result
-
Dalek Hal 312
Great file, easy to print
-
doctorone 3
Great plan but the pivot does not print as it is not complete like the eye stalk
-