-
Registration
Please register an account to access the Forum topics and features.
An Active Membership subscription gives you access to extra features and exclusive content!
Choosing Active Membership is a great way of supporting the community and showing your appreciation for our resources.
Please note that you need to register BEFORE you can use Facebook, Twitter or Google as a sign in method.
Files For 3D Printing
Files that can be used to for 3D printing physical versions, using your own printer or a service such as Shapeways etc.
Note that files for CNC and laser cutting can be found in their own sub-section, inside.
246 files
-
Free
Classic Dalek gun cage base rings
By BlueHinter
Two 29mm rings designed to form the front and back of a classic series Dalek gun cage. Interior dimensions designed to snugly fit 1" conduit, with a slight gap in the center for adding glue.
The 8 holes around the perimeter should be about the right size for the cage pieces if using old coat hangers, but can easily be drilled out to any size required.
75 downloads
-
Free
Magic 8 Ball Inner Sleeve
By redman99
This will slide into a magic 8 ball and sit against the inner ring, and the outer hole.
Should keep it nice and sturdy, and allow your alu tube to slide right though.
73 downloads
-
Free
Genesis Tapered Eyestalk
By Ferrain
Genesis Eyestalk TaperDec2
As above with 1cm insert into the next revision of the pivot, this insert should now be a solid piece compared to the previous version (should it shear away as per V1 it should fit back in & be pulled into place by the threaded rod as its tightened).
Genesis Eyestalk TaperDec3
As above .5cm insert into the first printed eye stalk spacer, this insert is smaller than originally planned as to fit on the printer bed of the Makerbot Replicator 2.
The pivot should not be printed first in the event that the pivot insert shears & can't be refitted.
ID of the threaded rod channel is approximately 1.62cm & this is to accommodate the 1.6cm diameter (approx) couplers for the 1.26mm threaded rod as used in my eye stalk design.
Print time on standard MB Replicator 2 should take about 2.5 hours & 40g (0.07IIbs).
Parts currently under (re) development to have a complete stalk assembly (add eye of your choice).
Pivot mounting.
Pivot with threaded rod channel or with threaded rod channel & insert guide hole.
1.2" diameter .75" long disc spacers with threaded rod channel & insert guide hole.
71 downloads
(0 reviews)0 comments
Updated
-
Free
(0 reviews)0 comments
Submitted
-
Free
NSD dome rotation gears
By Nimitz
This gear and pinion is designed to fit a Lazy Susan which has a diameter for the inner ring of 415mm. This Lazy Susan is the perfect size to be used on an NSD dome. it may work for other domes but I've not tested it with anything but an NSD dome. You'll need to print 2 pieces of both the "A" & "B" parts. the ends have lap joints for stability and the countersunk holes are for 10-32 size bolts. the height of the gear has been designed so that you can leave the rubber feet that come with the lazy susan on the inner ring in place and the gear will be the same height. you will need to drill holes in the gear where your rubber feet are so it will sit flush with the bottom of your dome rotation plate.
Note: the picture shows the gear sitting on the top of the dome rotation plate but that was just to take the picture. the gear is mounted on the underside of the dome rotation plate which is why it is the same height as the rubber feet on the inner ring so it sits flush
70 downloads
(0 reviews)0 comments
Updated
-
Free
(0 reviews)0 comments
Submitted
-
Free
Imperial Emperor/Davros Parts
By Chris Moliere
These are the parts for the Imperial Emperor from Remembrance of the Daleks, all in full scale. Please note that I didn't include the skirt, as that is a lot easier to construct from wood or fiberglass. I also didn't slice this set, so people could cut the file to their preferences. I would recommend printing the eye in flexible filament, since I use the straight measurements for its model; the outside is higher than the inside to help make painting it easier. Also, the dome thicknesses vary from 6-8 mm, so if you want it any different thicknesses, feel free to contact me. Please enjoy!
66 downloads
-
Free
TDP Dome - Whole STL, Plus Meshmixer Cut STL Files
By TimW
I drafted a TDP dome based on the plans from the forum using Fusion 360, diameter 500mm, height 190mm, arc radius 260mm. I used the revolve function from a sketch to get the dome shape then punched a hole in it where the eye is to go. I split up the dome STL into about 17 pieces (the number varied with on various attempts) using Meshmixer (top tip use plane cut with Cut Type - slice and Fill Type - remeshed fill.
66 downloads
(0 reviews)0 comments
Submitted
-
Free
Eye Ball mk3.stl
By pugwash
It's possible to print the main body (black) in about 11 hours at 0.2 resolution on an Ender 3 with very little support around the base. Infill of 20% is plenty. I've made this for a 30mm diameter eye stalk with a mm to spare.
This was intended as a one-off for my own Genesis Dalek but feel free to tinker.
66 downloads
(0 reviews)0 comments
Submitted
-
Free
NSD 2005 Oil Seal
By glynharper
This is my own design for an oil seal replacement.
It's not perfect, as the edges are a little faceted. Although I actually don't mind that myself as it appears more 'machine made' which I think suits a Dalek's appearance.
It incorporates an inner lip, in order to centrally locate your hemisphere. There is also a central part, which has a hole and a hexagon recess for a standard M6 head head bolt. This is to eliminate the requirement for MDF discs or other mounting methods to be stuck inside the hemis.
The idea is, but an M6 bolt through the hole (which is a tight fit to stop it dropping out.. tap it in if need be).
Then put a bead of black silicone in the recess of the oil seal and push the hemi into it. You can silicone inside as well, as there is access to do so.
The central supports are a ribbed structure, to stop the oil seal being able to be pulled away from the skirt easily.
Although the central recess will lock the M6 bolt in place, bear in mind it's still plastic so it will easily break if you put too much torque on the nuts you use to hold the oil seal on with. Best not to use lock nuts, but use normal nuts with spring washers, and some loctite. Nip them up, but don't over tighten them.
Would love some feedback, as this is my first design for a 3D printed Dalek part.
65 downloads
-
Free
SWD Gun Parts
By bryanxiii
.STL files for a Special Weapons Dalek based on some blue prints I found on this site, you will also have to slice the file for your printer,
These were made using tinkercad, please also note that the centre whole on the barrel is set to 50mm or around 1 1/2", the plan calls for a central pipe of 1 3/4", I however was unable to source an pipe in that size so I sized down.
65 downloads
(0 reviews)0 comments
Updated
-
Free
2005 Hemispheres
By ddoherty958
I wanted to give something back to PDF, so here are my NSD (2005) Hemis. I used the early dimensions because it'll use less filament, but it's only a 2mm difference.
64 downloads
(0 reviews)0 comments
Submitted
-
Free
Classic Dalek Appendages Cutting Torch Kit
By Luke S
A Zip File of the whole items is in the download to save up download room.
The 10mm tube is 350mm long.
I Made the Cutting Torch From the First Dalek Story when they cut the door down. This come with everything besides the 10mm tube and bendy tube. The Tube in the Screen Shots are just to show you what it looks like. Also The Colors in the screenshot are what you could spray paint it, besides the yellow tube, spray that black.
IF You have Downloaded any of my Prints please Pm if I have added or edited it, so i can send you the newest copy.
Unauthorized sales and distribution, in any format, is strictly prohibited.
Print Settings
Printer brand:
Creality
Supports:
Yes
Resolution:
0.1mm
Printer:
Ender 3
Infill:
100%
Filament_brand:
Filament_color:
white, Black
Filament_material:
PLA
63 downloads
(0 reviews)0 comments
Updated
-
Free
Shawcraft Eye Control
By kevin pedley
This is a copy of the Shawcraft eye control. The diameter of the "pulley" is 102mm, the same as the eye pivot so should give a 1:1 ratio when rotating the control. There are 4 holes around the outside of the control 8mm in diameter - idea if you have some 8mm dowel left over from the neck struts. The centre hole is 8mm, and the control lock is designed to take an 8mm nut with plastic insert.
61 downloads
(0 reviews)0 comments
Updated
-
Free
Necros/Renegade BASE (only) For Dome Lights
By Luke S
Took a long time and labor... just to get the slits in the bottom part. I used the Plans from the Necros and Renegade Daleks. Some Sanding may be needed after printing. It would be best for you to make a cast of the light part, and when you get those cast maybe you could sell them in the Sec shope for others 🤔
These Lights work perfectly for the Renegade Supreme, but you will need a band around the bottom.
Print Settings
Printer brand:
Creality
Supports:
Yes
Resolution:
0.1mm
Printer:
Ender 3
Infill:
100%
Filament_brand:
Filament_color:
Translucent white, Black
Filament_material:
PLA
59 downloads
-
Free
ball joint clamps
By Simchet
Weapon ball joint clamps.
You need two of each part, 8 off M6x100mm hex head screws, 8 off M6 mashers, 8 off M6 wing nuts 8 off 3x15 countersunk woodscrews.
The clamps sandwich the 100mm diameter spheres. Put the M6 bolts into the captive sockets and then screw this onto the inside of the gun box. Fit the weapons, then the 2nd clamp ring and then the washers and wing nuts. Adjust how free/tight you want the weapon to be with the wing nuts.
CAD file is in RS Design Spark Mechanical format (free 3D CAD). If you change the extension to .sdoc then it will also open in Ansys Spaceclaim (not free) and maybe other CAD packages.
56 downloads
(0 reviews)0 comments
Submitted
-
Free
NDP Plunger
By MechDesign
I think this is very close to the design shown in the plans. Let me know if there is something obviously wrong.
55 downloads
(1 review)0 comments
Submitted
-
Free
NSD Eye EMA Parts
By Chris Moliere
These are 3d models of the individual pieces of the NSD's eyeball. They were created using the CAD files in our downloads sections. Do to the small size of some the parts, I would recommend SLA or other forms of resin 3d printing. I also made a version of the VT-400 with the MRH-160Ps attached, in case the parts are too small to print individually. Enjoy!
55 downloads
(0 reviews)0 comments
Submitted
-
Free
Egg cup dome light - high poly
By ansonjames
I was originally going to make a "Power of the Daleks" variant and so I created this file, I managed to pick up a few genuine egg cups and then decided to make a different Dalek altogether.
52 downloads
(0 reviews)0 comments
Submitted
-
Free
1960s Egg Cup
By monkeytennis
This model comprises a 1960s egg cup model used on the Daleks between The Chase and The Evil of the Daleks.
I own a set of original egg cups and this model was made using measurements from the actual item.
It's in OBJ format. There is a second object in the file. This is a cube of precisely one meter in all dimensions. This is an aid for scaling if necessary.
51 downloads
-
Free
Shawcraft Eyestalk Pivot
By cdngoose
This file is an updated version of Ferrains first version. Phil has kindly donated his time to help out with drawing this part with new features,
Eye pivot
1" hole for eyestalk shaft
Smaller centered 3/8ths hole for threaded bar
Slot for threaded bar nut.
Hole through the backside to the slot for wiring.
3/8ths hole centered for pivot
51 downloads
(0 reviews)0 comments
Updated
-
Free
Colonel Barkers NSD Eye front.
By Aaron J Climas
This model was made in Maya and converted to STL.
It has been printed once on an 'Up' printer, and took 3hour 20min in total. Feel free to share images of your own prints of this model.
Cheers,
Aaron
50 downloads
(0 reviews)0 comments
Submitted
-
Free
Neck ring tri-foil holder
By MechDesign
This item allows the builder to drill a straight 3/4 inch hole in the neck rings instead of trying to drill 3 small 1/4 inch holes right next to each other at an angle. The angle of the holes puts the tri-foils at the same angle as the neck rings in the Shawcraft Movie Dalek Plans.
49 downloads
(0 reviews)0 comments
Updated
-
Free
Imperial Dalek: Eye Stalk
By Necrosis
This is a download for the Imperial Dalek eye stalk. The files are in .stl format making them easy to 3D print or to use as digital references/models. These parts are 1:1 scale and match the most recent revision of the Imperial Dalek plans making it plug and play to print or easy to scale to your Daleks needs. I personally 3D printed these units to create a mold that allows me to cast the part with perfect detail. You can achieve the center reflective disc by printing the part and then covering it with a reflective film as shown in the screenshots above. However, I prefer the none reflective disc on my personal Dalek build. The parts look great as 3D prints alone with some filler and primer and detail work. Recommend printing these parts slow and precise at 15% infill for best results.
(Would love to see any print results from anyone who chooses to share on this thread)
Details:
Scale - 1:1 (In compliance with Imperial Dalek Plans Version 3.5)
Parts included in this download - Eye Stalk * Eye Piece * Reflector * 4 Stalk Discs * Eye Pivot
NOTE: For ease of assembly, parts have a 0.5mm to 1mm tolerance. The eye Pivot has a 12mm (1/2") hole in the center for a bolt and a larger hole on the backside that can be used to attach a control rod for the eye stalk.
I will keep these files up to date and if you have any suggestions or find any errors please let me know so that I may update the parts.
49 downloads
-
Free
(0 reviews)0 comments
Updated
-
Top Downloads
Week
-
Free
-
Free
-
Free
-
Free
-
Free
Month
-
Free
-
Free
-
Free
-
Free
-
Free
Year
-
Free
-
Free
-
Free
-
Free
-
Free
All Time
-
Free
-
Free
-
Free
-
Free
-
Free
-
-
Recent File Reviews
-
Michael56 2
I'm in my late 60's. I live in Australia and have always enjoyed Doctor Who from the very first episode aired here around 1965 when I was 9 years old. Thought how amazing it would be to have a Dalek but had no idea how or where to even begin UNTIL I came across this site. Thanks for giving me the opportunity to at least be able to start on a Dalek build and will detail my progress as it goes along.
-
Mark Sheriff 6
Excellent , looks great and very well designed , well thought out . thank you
-
Marc Harris 54
I'm in my 50s and have since I was a boy watching Dr Who in the 70s always dreamed of making a Dalek for fun, now I have the time and resources, along with your forum's help it's time to live that dream.
I have watched some of the members videos, and I am very impressed with what I have seen.
Long live the Who verse.
I will document my progress and share any innovations I make
-
Chris R 25
Great set of models that printed and fitted together really easily. Can't comment on accuracy as I'm no expert but very happy with the result
-
Dalek Hal 312
Great file, easy to print
-
doctorone 3
Great plan but the pivot does not print as it is not complete like the eye stalk
-
-
Download Statistics
-
Recent File Comments
-
-
By WhosWho · Posted
@RepeatedMemeDid you change something? I haven't touched anything. -
By RepeatedMeme · Posted
@WhosWho @dalekray It's only showing an update because the (written) details were edited. -
-
By life size · Posted
I printed mine in PTEG, 235 nozzle, 60 Bed , no supports and it printed with no mess at all. I ran it at a 40 percent print speed, and the orientation was large cup facing down on my print. -
By John · Posted
See this FAQ topic for more on Downloads availability: -
By ChristmasDalek · Posted
Welcome to the forum! Sorry you have encountered a problem... While waiting for someone who knows more about the downloads section than I do to answer, you may find the explanation in @Johns answer to this thread: Be well, Kathy -
By tardis112 · Posted
Why am I not permitted to download this? -
By Mark Casto · Posted
This is such a useful file for the eye it is perfect for adding a fish tank led inside and looks great thank you. -
By DarthCranium · Posted
ok @Bodule. i apologize if i caused any issue. -
By Bodule · Posted
Hi @DarthCranium Can I suggest that you ask your question in the 3D Printer Discussions section of the forum please? https://www.projectdalek.com/index.php?/forum/209-3d-printer-discussions/ That section itself may be worth a read through, as is @ChristmasDalek's post above yours 👆 here as it may provide additional useful information on how to use the forum. -
By DarthCranium · Posted
What is a good size of 3D printer youd recommend if i wanted to make a dalek of my own? please let me know when able. Thanks -
By Dalek-Nik · Posted
Moflash lenses appear to be slightly difficult these days. the best bet in my opinion is 3D printing them. there are many accurate models here that can be printed on any FDM printer you can find. there is a chance that you can find the lenses online to buy, but those sites can be slightly sketchy. depending on the filament you buy and the printer you have/find, they can be produced fairly accurately. filament can come as cheap as 17 dollars, but do keep in mind that they can some -
By Chris R · Posted
Thanks for uploading these files. Printed really nicely with the odds and sods of filament I had around and very pleased with it, haven't done any tidying up or painting but it looks great as-is.
-
-
Highest Rated Submitters
No ratings this week.
No ratings this month.
-
1
-
2
-
3
-
4
-
5
-
1
-
2
-
3
-
4
-
5
-
-
Current Donation Goals
-
Finance the Forum Hosting 2024Raised £113
-
-
Top Templates
-
Free
-
Free
-
Free
-
Free
-
Free
-
