-
Registration
Please register an account to access the Forum topics and features.
An Active Membership subscription gives you access to extra features and exclusive content!
Choosing Active Membership is a great way of supporting the community and showing your appreciation for our resources.
Please note that you need to register BEFORE you can use Facebook, Twitter or Google as a sign in method.
Files For 3D Printing
Files that can be used to for 3D printing physical versions, using your own printer or a service such as Shapeways etc.
Note that files for CNC and laser cutting can be found in their own sub-section, inside.
246 files
-
Free
NSD Light Cage Surrounds
By Snape757
Here I have designed the surround to the Moflash lenses, I have to admit its fairly new and I may need to adjust the base to fit the lens, I suppose it depends on the lens?
Have a look, make a comment for improvement etc. Thanks.
230 downloads
(0 reviews)0 comments
Submitted
-
Free
Reworked NSD moflash cage.
By bappi
I downloaded the zip file from Ultrastar's downloads and noticed that 2 of the files were labelled wrong so corrected that with these files here, I also noticed when i had printed the base that when screwed on tight there was at least 5 mm gap around the bottom so i resliced the file and now it has a nice flat base i then drilled 2 holes through the base and bolted onto the dome.. I bought 2 twist fit bulb holders as u can see in the pics, this fits through the dome nicely and fits inside the mosflash lense very snug, to change the bulb just unscrew the cage.
222 downloads
(0 reviews)0 comments
Submitted
-
Free
NSD Dome Detail Kit
By trickster
This is a set of tools I made to help with detailing the dome. Some are attachments for a Dremel router base. These are useful for working on wooden domes. Others are more generic and can be used on any dome. All tools are shaped to fit along either the top curved part of the dome or the bottom cone part. Raft and support required where noted. They are numbered on this image and described below. The wrench is not included.:
1 Drill Guide - Guides drill bit perpendicular to dome surface
2 Dome Protractor - Marks out 45 degree angles
3 Dome Ruler * - Measures cm along the surface of the dome and from a center point
4 Long Longitude Arm * - Guide for longitudinal cuts, used with Base Adapter (7) maximum span
5 Short Longitude Arm * - Guide for longitudinal cuts, used with Base Adapter (7) span for lower dome cuts only
6 Latitude Arm * - Guide for latitudinal cut (back half of dome), used with Base Adapter (7)
7 Base Adapter * - Adapter which fits the Dremel router base. Key attaches to Longitude and Latitude Arms (4,5,6) or freehand
8 Angle Guide Bottom - Guides cuts on the cone portion of the dome, used with Angle Guide Top (9)
9 Angle Guide Top - Guides cuts on the cone portion of the dome, used with Angle Guide Bottom (8)
10 Cone Ruler * - Measures and marks the cone portion of the dome
11 Port Template - Marks the eyestalk port
12 Front Indent * - Marks the front indents
13 & 14 Rear indent * - Marks the rear indents, pieces glue together at chamfer angle
* raft and full support required
The Drill Guide, Dome Protractor, Dome and Cone Rulers, Port and Indent templates are pretty obvious how they work
The Base Adapter attaches to a Dremel router base and gives it a solid contact to the dome. It attaches to the router base with two rectangular keys and a pair of bolts/wingnuts. It can be used freehand or with one of the Arms which attach to it with a key block.
The Angle Guide pieces are joined by two 3/16" x 16" metal rods. The bottom mounts to a board and the Dremel router base rides the rods at the proper angle to fit against the cone portion of the dome. Like this:
Here's a build diary entry describing their use
Here's the whole thing: NSD Dome Detail Kit.zip
213 downloads
(0 reviews)0 comments
Updated
-
Free
NSD EyeStalk Disks
By Luke S
Here's my way of giving back to Project Dalek. There are 3 disk in the Set, each different sizes. Each are scaled from the Plans. This is my First 3d Printed Model, If this goes well i might make some more 3d prints. When I made these there is a flat bottom to them so, you may want to cast them in fiberglass molds or something. to make them hollow/curved in the inside. I wish you the best of luck of building your Dalek!
211 downloads
(0 reviews)0 comments
Updated
-
Free
NSD: Front Gun Box Detail
By Ultrastar
NSD: Front Gun Box Detail
By: Ultrastar
Intended for Dalek builders out there with the ability to 3D print models. This is a 3D model of the NSD front gun box detail. This model was created with the purpose of 3D-Printing. However, with this being a 1:1 scale and 100% accurate model it can also be used as a reference for your own builds. Feel free to ask questions about this model as you see fit.
196 downloads
-
Free
Movie Beaker (Updated)
By WhosWho
Here's my model of a Movie Dalek Beaker. I hope this helps any who don't have an original to take molds from.
196 downloads
-
Free
NSD Supreme Parts
By Chris Moliere
This is a set of 3d printable parts for the NSD Supreme, using a combination of photos of the original prop from episodes and events, @acrylikhan and @bec weir's build diaries, and some of the dimensions listed in the plans. It was very difficult, given that the plans only give a rough approximation of the measurements. The parts here are the the bases for the front and side clamps, the clamps themselves, the neck furniture, and the light plinths. Enjoy!
195 downloads
(0 reviews)0 comments
Updated
-
Free
MK1/2/3 & Movie 1/2 Stalk/Pivot Set!
By Luke S
So you have a budget , or don't know how to taper wood.
A 18mm hole has been added so that you can use them, if you just used the eyestalk without a 18mm rod it would break from the weight.
So I used the Mk1 Dalek Blueprints to Make these models.
IF You have Downloaded any of my Prints please Pm if I have added or edited it, so i can send you the newest copy.
Print Settings
Printer brand:
Creality
Printer:
Ender 3
Infill:
100%
Filament_brand:
Filament_color:
white, Black, Gray
Filament_material:
PLA
194 downloads
(0 reviews)0 comments
Updated
-
Free
Slat-small-shell-STL
By acrylikhan
STL File for stereolithography. NSD Shoulder Slat: Size Small. File Version 2.0
192 downloads
-
Free
Dalek Plunger Variety Pack
By Chris Moliere
This is a set of Dalek plungers created using the profiles in the plans. All are here, save the NSD plunger. I designed them to be printed in flex filament, so they might need some finishing. Use for whatever you like, but you can credit me if you want!
191 downloads
(0 reviews)0 comments
Updated
-
Free
NSD Cowl
By Macropod80
This is the most accurate-looking I could get going by the dimensions in the official plans back in 2017 (which don't seem to me to quite work exactly as specified?) Fits fine on my Dalek Kevin's dome (bumpy as it is). Of course my version of 'exactly according to the plans' may well differ from your version of 'exactly according to the plans', but that's Dalek-building for you...
This has been around for a while so I know at least one other builder in the world has used it successfully.
I printed in PLA for toughness and lack of distortion, at 0.2mm layer height. Just barely squeezes into an UpBox+.
186 downloads
-
Free
TDP Eyestalk
By cdngoose
This file was produced by Mr_Tesla, and can also be found on Thingverse. He has included the rights for anyone to use this file in any manner they deem fit. I have used this as a possible replacement for dreadnaughts eye and also as a display booth piece acting as a Dalek Periscope as seen on Asylum of the Daleks
185 downloads
-
Free
NS Center Slat
By acrylikhan
Center Slat for New Series Dalek Design, Full Scale, Dimensions should be in Metric. Part should print on any 3D Printing Machine, test prints were achieved successfully with:
Objet/Stratasys Machines: Eden 333, Eden 500, and Connex 2 and Fortus 450mc (FDM)
3D Systems: SLA500, Projet 1200 (SLS)
181 downloads
-
Free
NSD: Neck Ring Block
By Ultrastar
NSD: Neck Ring Block
By: Ultrastar
Intended for Dalek builders out there with the ability to 3D print models. This is a 3D model of the NSD Neck Ring Block. This model was created with the purpose of 3D-Printing. However, with this being a 1:1 scale and 100% accurate model it can also be used as a reference for your own builds. Feel free to ask questions about this model as you see fit.
181 downloads
(2 reviews)0 comments
Updated
-
Free
Mk1 Gun Rods
By Luke S
So here my version of a mk1 gun rod, kinda like a clear acrylic one. You can print it colored or clear filler. The Rings, Rods, Octagons are separate pieces, so you can put it together easily and with the octagons not with it and giving you a hard time trying to paint it. The Gun Cylinder has pre cut holes for the rods to fit in.
Print Settings
Printer brand:
Creality
Supports:
Yes
Resolution:
0.1mm
Printer:
Ender 3
Infill:
100%
Filament_brand:
Filament_color:
white, Black, gray
Filament_material:
PLA
180 downloads
(0 reviews)0 comments
Updated
-
Free
3d printable NDP Shoulders
By Chris Moliere
Here it is! This thing took an eternity to design, and would have taken much longer if the Loft tool didn't exist. There are 66 bodies in this, which I might need to rename soon, but I think their size will help with their placement. Enjoy!
179 downloads
-
Free
Plans for laser cutting NSD light cages from 1/4" MDF
By cjorgensenmd
If you have access to a laser cutter, you can cut out the attached files and assemble NSD light cages from 1/4" MDF
177 downloads
(0 reviews)0 comments
Updated
-
Free
Evil of the Daleks - Emperor Dalek 5 Inch Model Kit
By audrey2
This is a model kit of the Emperor of the Daleks from Evil of the Daleks.
It should print in scale with the Character Options dalek figures. It should print with no supports required if you have a well-tuned printer printing at a high enough resolution.
Print 12 of the hemi_large, and 2 of the hemi_small, and you'll have everything needed for a Dalek civil war.
175 downloads
-
Free
Moflash Lens STL (NSD dome lights)
By ddoherty958
This is my Moflash lens for the NSD dome lights. It's just the lens, no cage. It's as accurate as I can make it, of course feedback is welcome.
If you want to try printing it in clear filament here's the file! I found it extremely hard, having problems with bed adhesion in particular.
175 downloads
-
Free
Movie Dalek Domelight Beaker 3D Scan
By audrey2
This is a 3D scan I took off an original beaker from the 60s. The file was then cleaned up, and an interior shape was cut to reasonably match the original.
Can be used to 3D print or carve.
173 downloads
(2 reviews)0 comments
Updated
-
Free
NSD centered oil seal
By beeweasd
i found one similar to this but it was slightly to big, so i made one with the correct dimensions.
171 downloads
-
Free
NSD Small Slat
By Ferrain
NSD Small Slat I designed & printed about a year ago. Slightly curved to fit, fill & sand (hopefully easier) to the shoulders.
More details Post 15.
162 downloads
(0 reviews)0 comments
Submitted
-
Free
Genesis Dome Lenses
By Firebiro
This is a much sought after model of the Dome lenses for the 70's Day of the Daleks - Genesis of the Daleks Wipac lenses, intended to be printed at 100% to have the 69.9mm diameter. You can download the model and remove one instance to print one at a time, I have checked this model on Shapeways and it appears to pass all their tests, n.b. if using shapeways use the Print it anyway option
160 downloads
(0 reviews)0 comments
Submitted
-
Free
MK1/2/3 Movie1/2 EyeDisc & Tube Set
By Luke S
I used the Plans to make these. It Fits with my Dalek eyestalk set. You may want to use clear filling for the tube. You may want to break it apart if you have a small printer.
159 downloads
(0 reviews)0 comments
Updated
-
Free
NSD Light Cage with Thread
By DalekDucky
NB: Single zipped folder or 6 individual files - your choice
So I wanted a light cage that did not show screws when assembled and came up with this solution.
It's essentially a remix of @Ultrastar Light cage with the following modifications.
Added thread to the lower part of the cage plus the inner part of the threaded piece to be attached to the Dalek head The hole for the base and top is slightly larger to make screwing around the cage easier no change to his support
In this file I also included the surround part I did for my bulb using a trailer light. The spring from the light lid holds it in place to the lower part so no attachments required.
I used a Ping Pong bulb inside the moflash. so you may want to use some hot glue to secure that part.
The lower part has indentation to allow for my trailer base, if you don't need that, that part is low enough that should not be seen in your cage.
Enjoy
P.S. You will need to rotate a few pieces for print. support needed for some parts depending on your printer calibration.
158 downloads
-
Top Downloads
Week
-
Free
-
Free
-
Free
-
Free
-
Free
Month
-
Free
-
Free
-
Free
-
Free
-
Free
Year
-
Free
-
Free
-
Free
-
Free
-
Free
All Time
-
Free
-
Free
-
Free
-
Free
-
Free
-
-
Recent File Reviews
-
Michael56 2
I'm in my late 60's. I live in Australia and have always enjoyed Doctor Who from the very first episode aired here around 1965 when I was 9 years old. Thought how amazing it would be to have a Dalek but had no idea how or where to even begin UNTIL I came across this site. Thanks for giving me the opportunity to at least be able to start on a Dalek build and will detail my progress as it goes along.
-
Mark Sheriff 6
Excellent , looks great and very well designed , well thought out . thank you
-
Marc Harris 54
I'm in my 50s and have since I was a boy watching Dr Who in the 70s always dreamed of making a Dalek for fun, now I have the time and resources, along with your forum's help it's time to live that dream.
I have watched some of the members videos, and I am very impressed with what I have seen.
Long live the Who verse.
I will document my progress and share any innovations I make
-
Chris R 25
Great set of models that printed and fitted together really easily. Can't comment on accuracy as I'm no expert but very happy with the result
-
Dalek Hal 312
Great file, easy to print
-
doctorone 3
Great plan but the pivot does not print as it is not complete like the eye stalk
-
-
Download Statistics
-
Recent File Comments
-
-
By WhosWho · Posted
@RepeatedMemeDid you change something? I haven't touched anything. -
By RepeatedMeme · Posted
@WhosWho @dalekray It's only showing an update because the (written) details were edited. -
-
By life size · Posted
I printed mine in PTEG, 235 nozzle, 60 Bed , no supports and it printed with no mess at all. I ran it at a 40 percent print speed, and the orientation was large cup facing down on my print. -
By John · Posted
See this FAQ topic for more on Downloads availability: -
By ChristmasDalek · Posted
Welcome to the forum! Sorry you have encountered a problem... While waiting for someone who knows more about the downloads section than I do to answer, you may find the explanation in @Johns answer to this thread: Be well, Kathy -
By tardis112 · Posted
Why am I not permitted to download this? -
By Mark Casto · Posted
This is such a useful file for the eye it is perfect for adding a fish tank led inside and looks great thank you. -
By DarthCranium · Posted
ok @Bodule. i apologize if i caused any issue. -
By Bodule · Posted
Hi @DarthCranium Can I suggest that you ask your question in the 3D Printer Discussions section of the forum please? https://www.projectdalek.com/index.php?/forum/209-3d-printer-discussions/ That section itself may be worth a read through, as is @ChristmasDalek's post above yours 👆 here as it may provide additional useful information on how to use the forum. -
By DarthCranium · Posted
What is a good size of 3D printer youd recommend if i wanted to make a dalek of my own? please let me know when able. Thanks -
By Dalek-Nik · Posted
Moflash lenses appear to be slightly difficult these days. the best bet in my opinion is 3D printing them. there are many accurate models here that can be printed on any FDM printer you can find. there is a chance that you can find the lenses online to buy, but those sites can be slightly sketchy. depending on the filament you buy and the printer you have/find, they can be produced fairly accurately. filament can come as cheap as 17 dollars, but do keep in mind that they can some -
By Chris R · Posted
Thanks for uploading these files. Printed really nicely with the odds and sods of filament I had around and very pleased with it, haven't done any tidying up or painting but it looks great as-is.
-
-
Highest Rated Submitters
No ratings this week.
No ratings this month.
-
1
-
2
-
3
-
4
-
5
-
1
-
2
-
3
-
4
-
5
-
-
Current Donation Goals
-
Finance the Forum Hosting 2024Raised £113
-
-
Top Templates
-
Free
-
Free
-
Free
-
Free
-
Free
-
