-
Registration
Please register an account to access the Forum topics and features.
An Active Membership subscription gives you access to extra features and exclusive content!
Choosing Active Membership is a great way of supporting the community and showing your appreciation for our resources.
Please note that you need to register BEFORE you can use Facebook, Twitter or Google as a sign in method.
Files For 3D Printing
Files that can be used to for 3D printing physical versions, using your own printer or a service such as Shapeways etc.
Note that files for CNC and laser cutting can be found in their own sub-section, inside.
247 files
-
Free
2005 series hemisphere
By Snape757
2005 series hemisphere, add an extrusion to the bottom for the thickness of your material, or ask me and I will.
98 downloads
(0 reviews)0 comments
Submitted
-
Free
(0 reviews)0 comments
Submitted
-
Free
(0 reviews)0 comments
Submitted
-
Free
Invasion Earth: 2150 A.D Eyestalk Pivot
By cdngoose
This file is the Eyestalk Pivot without a flat spot as seen on Invasion Earth Dalek . Phil has kindly donated his time to help out with drawing this part with new features,
NOTE* picture presently shows flat spot that has been eliminated.
Eye pivot
1" hole for eyestalk shaft
Smaller centered 3/8ths hole for threaded bar
Slot for threaded bar nut.
Hole through the backside to the slot for wiring.
3/8ths hole centered for pivot
29 downloads
(0 reviews)0 comments
Updated
-
Free
Imperial Dalek Plunger v002
By Aaron J Climas
Thanks to Shane for helping me out with dimensions on this! Dalek Candi has an Imperial plunger that has original heritage. He was kind enough to measure up his plunger for me and I have build a 3D model of it based on those dimensions.
To my eyes, the front feels too big, however I haven't seen an original in hand, or printed this one yet. So I can't judge.
The rear section I have deliberate made quite soft, as the original casts are, and I feel doing a perfect computer set of straight angles wouldn't give the right feeling to the whole thing. There are only 120 verts around the circumference, I could potentially increase that if anyone wanted to make a more detailed print than that. Most people, I imagine will be using relatively low end printers that will require cleanup anyway, so I don't think it should be a problem.
Potentially if required I could split it to a front and back, so the front dish/ surround could be printed, then the rear 'tower' printed and then joined. In my experience prints often warp somewhere and joining like that often ends up with parts that don't join well.
It was created in Autodesk Maya, and the front ring should be about 120mm to give sense of overall scale. Please give me a shout and show images if you print it, as I would love to see the results.
All the best,
Aaron
92 downloads
(1 review)0 comments
Updated
-
Free
NSD Eyestalk Pivot
By cdngoose
This NSD Eyestalk pivot is similar to my Shawcraft version ( Thanks to Phil for Drawing this up for me)
NSD Eye pivot
1" hole for eyestalk shaft
Smaller centered 3/8ths hole for threaded bar
Slot for threaded bar nut.
Hole through the backside to the slot for wiring.
3/8ths hole centered for pivot
146 downloads
-
Free
Shawcraft Eyestalk Pivot
By cdngoose
This file is an updated version of Ferrains first version. Phil has kindly donated his time to help out with drawing this part with new features,
Eye pivot
1" hole for eyestalk shaft
Smaller centered 3/8ths hole for threaded bar
Slot for threaded bar nut.
Hole through the backside to the slot for wiring.
3/8ths hole centered for pivot
51 downloads
(0 reviews)0 comments
Updated
-
Free
Shawcraft mk1 Kit
By Sparky_Butane
This is a complete 3D printable kit of a mk1. All of the pieces are separated and allowances are included. All of the pieces should assemble with little or no sanding. Some pieces were simplified so that it was actually printable. I haven't printed it yet so contact me with comments, questions, or concerns.
Enjoy!
mk1.zip
712 downloads
-
Free
Torch Eye kit for Planet Supreme Dalek
By Sparky_Butane
All the pieces are ready for printing. I have designed them with allowance so they should fit together without sanding, hopefully. Please message me with questions or comments.
Thanks and Enjoy
242 downloads
(1 review)0 comments
Updated
-
Free
mk3 or "Egg Cup" lights
By Sparky_Butane
Here are the files for 3D printing the mk3 dome lights. If you have any questions or comments please message me.
Thanks and Enjoy
102 downloads
(0 reviews)0 comments
Submitted
-
Free
mk1 and 2 dome lights
By Sparky_Butane
Included are a solid and shelled files. They are as accurate as I could make them so please message me with any comments or questions.
Thanks and Enjoy
108 downloads
(0 reviews)0 comments
Submitted
-
Free
Oil Seal with centered secure
By cdngoose
This Oil seal is like Kresty,s file also found in this section, however I was not after a Disco version of Dalek ( at least not yet, I do have future plans for Kresty.s oil seal surround) so it has a centered secure piece and a bit thicker edge. I have printed close to 200 of these now and they are sized to fit the 100 mm fillable Christmas ornament.
(future plans - I will use Krestys oil seals for two Daleks that will be replacing my street lamps on either side of my driveway, I will also add an arduino with motion sensor so the dome will follow anyone walking by the end of my driveway) I live in an Amish community and they already think I'm Satan, might as well prove it! :-)
cdngoose
110 downloads
(0 reviews)0 comments
Updated
-
Free
Shawcraft Eye V2
By cdngoose
This file is for the Shawcraft version of the Eye and is Version 2 already, I normally install the eye on a 3/4 inch ABS threaded tube so version 1 has an opening to accept that setup. However, everyone has a different way of installing the eye to the eyestalk and I had this file altered to allow the builder a choice of what size hole they need. Though this file does have a pilot hole which is centered for you already. The picture you see is the Eye I do have installed on Nyder and I will only use this file from now on when I'm making a Shawcraft Dalek! No more magic 8 ball and a can of tomato soup with 10 pounds of Bondo!
Once again I need to Thank Philip McNulty for all his efforts in drawing up these parts for me and for all PDF members.
Their are two inserts for this Eye which will cover most years of Shawcraft Daleks included in this download.
Cdngoose.
257 downloads
(1 review)0 comments
Updated
-
Free
NSD Eyestalk Keyed Base
By cdngoose
This file is for the NSD eyestalk base, it was created by Ray Arell in Oregon USA. I have not printed this file yet but I like the ability of the keyed insertion of the eyestalk into the Base.
Cdngoose
from Ray
This is the base of the Dalek eye stalk. I wanted an easy method to access the dome electronics, so I put the eye stalk on a keyed lock. You insert the eye stalk and rotate it to lock it into the base.
Dalek Eye Stalk Base by elmoray is licensed under the Creative Commons - Attribution - Non-Commercial license.
So what's this mean?
Remixing or Changing this Thing is allowed.
Commercial use is not allowed.
91 downloads
-
Free
Dalek Eyestalk Discs
By cdngoose
Here is a simple file, I have found a baby Blue PLA filament that is quite close in colour and these simple files can be adjusted to suit the size you need for your own Dalek. They can also be painted if you don't have access to the light blue filament..
303 downloads
-
Free
NSD Moflash lens
By cdngoose
I truly believe the 3D printer is a Dalek builders best friend. Since the Moflash Lens is no longer available we can now print one. I used this file from Thingverse and it is quite acceptable. Below is the caveat for its use.
A close approximation of the Moflash lenses used for Dalek NSD dome lights. I do not have a real one, so attempted this for my own NSD.
Dimensioned to fit inside the housings described in the Project Dalek NSD plans.
Print in a transparent or semi-transparent material as desired.
Dalek NSD Moflash-style Dome Light Lens by miproductions is licensed under the Creative Commons - Attribution - Non-Commercial license.
So what's this mean?
Remixing or Changing this Thing is allowed.
Commercial use is not allowed.
Once again I did not create this file but I have used it and it needs to be available to PDF members.
cdngoose
Note: Above are the pictures I took during and after printing, first one is nearing the end of print and the second is print finished. The third one is with the filler removed while the last one is with a flashlight with weak batteries. all in all I prefer this look over the original Moflash unit, I like the silver finish and it glows nicely.. Once the light hits it their is an oddness about the silver glow that makes it far more Dalek worthy!
Enjoy, and with the discontinued production of these lenses take heart that we will have them forever now! Gone are the days of scrounging and pleading in back corners for obscure parts to make our obsession!
cdngoose
319 downloads
(1 review)0 comments
Updated
-
Free
TDP Eyestalk
By cdngoose
This file was produced by Mr_Tesla, and can also be found on Thingverse. He has included the rights for anyone to use this file in any manner they deem fit. I have used this as a possible replacement for dreadnaughts eye and also as a display booth piece acting as a Dalek Periscope as seen on Asylum of the Daleks
185 downloads
-
Free
Cdngoose 2008 Davros
By cdngoose
Included in this package of STL files are all the parts I have printed off for my 2008 Davro's panel. Also included are the measured blueprints for each piece. This way you can ensure the parts are exact or re-size them to fit your panels. Please look to Cdngoose 2008 Davro's build for information on how they were created and used. All of these files were created for me by Phillip McNulty, I owe him a Huge Thank You for not only making me these STL files from his CAD drawings but for allowing me to share them with all PDF members.
All files were printed in PLA filament as well as the rubber boots were also printed in flexible PLA
Hope these help others in their building process. Though they do not make exact reproductions of the TV show parts I believe they are more than close enough that when fans take pictures while standing beside Davro's they will be very pleased!
Cdngoose
1,285 downloads
(2 reviews)0 comments
Updated
-
Free
NS Center Slat
By acrylikhan
Center Slat for New Series Dalek Design, Full Scale, Dimensions should be in Metric. Part should print on any 3D Printing Machine, test prints were achieved successfully with:
Objet/Stratasys Machines: Eden 333, Eden 500, and Connex 2 and Fortus 450mc (FDM)
3D Systems: SLA500, Projet 1200 (SLS)
180 downloads
-
Free
TrainWreck's NSD Skirt Hemisphere
By TrainWreck
Couldn't get the other hemesphere files on here to open for me so I modeled my own.
I based the scale off of the NSD design booklet.
Any feedback is welcome!
88 downloads
(0 reviews)0 comments
Updated
-
Free
Printable Oil Seal Surrounds and Hemispheres (Glowing?)
By Kresty
My take on oil seal surrounds and hemispheres... I'm not sure these are practical as it takes an hour to print a surround and a couple for a hemisphere, but here they are...
The reason I did this was because brialath has talked about a Disco Dalek and I wanted to see if WS2812B LEDs would be able to light a 100mm hemisphere. Since I made the hemisphere, I decided a mount for the aforementioned LEDs built into the surround might be good, and the traditional center bolt doesn't really work because the LED needs to be there.
Since I could I also made a solid hemisphere that might print better, and a surround with a centered bolt hole for an M4 bolt, and a little block to keep the bolt head from turning. I considered glynharper's surrounds, however I wanted an exact fit for the hemisphere I'd made, and I wanted a enough room for a 12-14mm washer to distribute the load. So that meant I needed a block to hold the M4 bolt head, the recessed version wouldn't work. Also, of course I needed a version with a spot for the LED in the middle.
The surrounds are intended to fit exactly in the middle of the hemisphere. They probably need some sort of adhesive, but for my printer it was a really close fit.
Since normal humans could reuse these for xmas ornaments or something, I put them on Thingiverse, with more info... http://www.thingiverse.com/thing:726897 (including the openscad & sketchup files for them).
138 downloads
-
Free
NSD Neck Blocks - Kresty's version
By Kresty
NSD Neck Blocks - Sketchup files are in the Thingiverse thing at http://www.thingiverse.com/thing:727027 since PDF doesn't seem to like them in the post, in case you need to modify the hole.
I think they turned out fairly nice. They have fatter backs than fronts and match the PDF as well as I could. I had trouble finding the exact dimensions for the corner rounding or the position of the bearing though, but I'm happy with it. The hollow version is intended to snap a 14mm bearing into it, however I'm not sure it'll fit (I don't have one to try). Looking at it, it seems like the edges come in a little much, but it seems to align with both the PDF and photos I found, so...
Now I just need to print another 23 of them!
83 downloads
(1 review)0 comments
Submitted
-
Free
Classic Eyeball
By Aaron J Climas
This is the front half of a classic style eyeball from the 60's. It's a slightly odd size hemisphere, and the 12 degree angle on the lip can be hard to get even.
So I have made a 3D print file, presented in both STL and OBJ format for people to print if they aren't so keen on making on themselves.
I haven't printed this item yet, but plan to later today. Although checking over the file there should be no major issues. It should fit perfectly flush with a 4" (102mm) hemisphere. It has 360 isoparms coming out across the body, so shouldn't suffer from not having enough resolution on the body.
Edit- I printed the file today, and it came out without a hitch. Although the model was 90 degrees out! Please give me a shout if you print this.
77 downloads
-
Free
Imperial Dalek Eyeball
By Aaron J Climas
Hey guys.
This is a STL file of the Imperial Dalek eyeball. It's in two halves that need to be printed and glued together.
It is a pair of STL files. They are much larger than normal as I have found issues with low resolution geometry making the prints come out with hard edges. If this is too much geometry I will remodel and upload again.
The front of the eye isn't as deep as the original prop, because it makes adding the front much harder! However I could do that variation if someone was keen.
The front of the eyeball itself is slightly rounded off as per the original, rather than being dead flat.
The rear of the ball has a nice flat section for tube to sit flush against, as well as a pilot hole included for drilling a central hole.
I haven't printed this file yet, but intend to tomorrow!
EDIT. The rear of the eyeball has a hole in he model. I have fixed the model, but not uploaded yet. This will be fixed soon.
EDIT- The previous upload didn't include the front of the eye. I only just saw a message about it then. (4th March 2016.)
95 downloads
-
Free
Complete NSD Scale Model
By audrey2
All the parts for a scale NSD that can be printed and assembled.
The parts are designed to go together at a 1/5 scale, and while it may work in other scales I haven't tried them yet, so that's up to you to play around with.
You can see how I printed mine and put mine together when printed on a Replicator 2 here.
287 downloads
-
Top Downloads
Week
-
Free
-
Free
-
Free
-
Free
-
Free
Month
-
Free
-
Free
-
Free
-
Free
-
Free
Year
-
Free
-
Free
-
Free
-
Free
-
Free
All Time
-
Free
-
Free
-
Free
-
Free
-
Free
-
-
Recent File Reviews
-
Michael56 2
I'm in my late 60's. I live in Australia and have always enjoyed Doctor Who from the very first episode aired here around 1965 when I was 9 years old. Thought how amazing it would be to have a Dalek but had no idea how or where to even begin UNTIL I came across this site. Thanks for giving me the opportunity to at least be able to start on a Dalek build and will detail my progress as it goes along.
-
Mark Sheriff 6
Excellent , looks great and very well designed , well thought out . thank you
-
Marc Harris 54
I'm in my 50s and have since I was a boy watching Dr Who in the 70s always dreamed of making a Dalek for fun, now I have the time and resources, along with your forum's help it's time to live that dream.
I have watched some of the members videos, and I am very impressed with what I have seen.
Long live the Who verse.
I will document my progress and share any innovations I make
-
Chris R 25
Great set of models that printed and fitted together really easily. Can't comment on accuracy as I'm no expert but very happy with the result
-
Dalek Hal 312
Great file, easy to print
-
doctorone 3
Great plan but the pivot does not print as it is not complete like the eye stalk
-
-
Download Statistics
-
Recent File Comments
-
-
By WhosWho · Posted
@RepeatedMemeDid you change something? I haven't touched anything. -
By RepeatedMeme · Posted
@WhosWho @dalekray It's only showing an update because the (written) details were edited. -
-
By life size · Posted
I printed mine in PTEG, 235 nozzle, 60 Bed , no supports and it printed with no mess at all. I ran it at a 40 percent print speed, and the orientation was large cup facing down on my print. -
By John · Posted
See this FAQ topic for more on Downloads availability: -
By ChristmasDalek · Posted
Welcome to the forum! Sorry you have encountered a problem... While waiting for someone who knows more about the downloads section than I do to answer, you may find the explanation in @Johns answer to this thread: Be well, Kathy -
By tardis112 · Posted
Why am I not permitted to download this? -
By Mark Casto · Posted
This is such a useful file for the eye it is perfect for adding a fish tank led inside and looks great thank you. -
By DarthCranium · Posted
ok @Bodule. i apologize if i caused any issue. -
By Bodule · Posted
Hi @DarthCranium Can I suggest that you ask your question in the 3D Printer Discussions section of the forum please? https://www.projectdalek.com/index.php?/forum/209-3d-printer-discussions/ That section itself may be worth a read through, as is @ChristmasDalek's post above yours 👆 here as it may provide additional useful information on how to use the forum. -
By DarthCranium · Posted
What is a good size of 3D printer youd recommend if i wanted to make a dalek of my own? please let me know when able. Thanks -
By Dalek-Nik · Posted
Moflash lenses appear to be slightly difficult these days. the best bet in my opinion is 3D printing them. there are many accurate models here that can be printed on any FDM printer you can find. there is a chance that you can find the lenses online to buy, but those sites can be slightly sketchy. depending on the filament you buy and the printer you have/find, they can be produced fairly accurately. filament can come as cheap as 17 dollars, but do keep in mind that they can some -
By Chris R · Posted
Thanks for uploading these files. Printed really nicely with the odds and sods of filament I had around and very pleased with it, haven't done any tidying up or painting but it looks great as-is.
-
-
Highest Rated Submitters
No ratings this week.
No ratings this month.
-
1
-
2
-
3
-
4
-
5
-
1
-
2
-
3
-
4
-
5
-
-
Current Donation Goals
-
Finance the Forum Hosting 2024Raised £113
-
-
Top Templates
-
Free
-
Free
-
Free
-
Free
-
Free
-
